All issues

The problem of formation of a material, which has the coefficients of attenuations and scattering close or coinciding with the same coefficients for some other predetermined material was considered. A computer processing of values of these coefficients for a big set of various materials has been carried out and their dependence on radiation energy value was studied. The conclusion was drawn about probability of successful solution of the problem in many cases and difficulties, which may occur were pointed out. A set of computer calculations carried out for some specific materials is provided.

Traditional geological search methods going to be ineffective. The exploration depth of kimberlite bodies and ore deposits has increased significantly. The only direct exploration method is to drill a system of wells to the depths that provide access to the enclosing rocks. Due to the high cost of drilling, the role of inter-well survey methods has increased. They allows to increase the mean well spacing without significantly reducing the kimberlite or ore body missing probability. The method of inter-well radio wave survey is effective to search for high contrast conductivity objects. The physics of the method based on the dependence of the electromagnetic wave propagation on the propagation medium conductivity. The source and receiver of electromagnetic radiation is an electric dipole, they are placed in adjacent wells. The distance between the source and receiver is known. Therefore we could estimate the medium absorption coefficient by the rate of radio wave amplitude decrease. Low electrical resistance rocks corresponds to high absorption of radio waves. The inter-well measurement data allows to estimate an effective electrical resistance (or conductivity) of the rock. Typically, the source and receiver are immersed in adjacent wells synchronously. The value of the of the electric field amplitude measured at the receiver site allows to estimate the average value of the attenuation coefficient on the line connecting the source and receiver. The measurements are taken during stops, approximately every 5 m. The distance between stops is much less than the distance between adjacent wells. This leads to significant spatial anisotropy in the measured data distribution. Drill grid covers a large area, and our point is to build a three-dimensional model of the distribution of the electrical properties of the inter-well space throughout the whole area. The anisotropy of spatial distribution makes hard to the use of standard geostatistics approach. To build a three-dimensional model of attenuation coefficient, we used one of machine learning theory methods, the method of nearest neighbors. In this method, the value of the absorption coefficient at a given point is calculated by $k$ nearest measurements. The number $k$ should be determined from additional reasons. The spatial distribution anisotropy effect can be reduced by changing the spatial scale in the horizontal direction. The scale factor $\lambda$ is one yet external parameter of the problem. To select the parameters $k$ and $\lambda$ values we used the determination coefficient. To demonstrate the absorption coefficient three-dimensional image construction we apply the procedure to the inter-well radio wave survey data. The data was obtained at one of the sites in Yakutia.

The article considers the mathematical aspects of the problem of identifying a multicomponent scattering medium based on pulsed multienergy X-ray irradiation data. X-ray diagnostics problems are of considerable interest from both theoretical and practical points of view, and radiographic methods are indispensable in non-destructive testing of products.

Within the framework of a mathematical model based on a non-stationary integro-differential equation of radiation transfer, the inverse problem of finding the attenuation coefficient for radiation known at the boundary of the region and the problem of identifying a substance based on the found values of the attenuation coefficient on a discrete set of irradiation energies of the medium are formulated.

A preliminary processing of a wide list of substances of interest in computed tomography was carried out to determine the possibility of their identification by an approximately specified radiation attenuation coefficient characterizing the medium. When analyzing the degree of proximity of substances in a certain norm, it was found that the set of all possible substances potentially contained in the medium is divided into a finite number of non-intersecting clusters. For a sufficiently short duration of the probing signal, the scattering component of the radiation leaving the medium is asymptotically small. This circumstance allows us to reduce the inverse problem for the radiation transfer equation to the problem of inverting the Radon transform from the attenuation coefficient. The possibility of unambiguous or partial identification of a substance by varying the duration of the probing pulse and the number of energy levels of irradiation of the medium is analyzed using numerical modeling methods on a specially developed digital phantom.

The paper presents an analysis of the nonlinear equation of spin wave transport by the method of characteristics. The conclusion of a new mathematical model of spin wave propagation is presented for the solution of which the characteristic is applied. The behavior analysis of the behavior of the real and imaginary parts of the wave and its amplitude is performed. The phase portraits demonstrate the dependence of the desired function on the nonlinearity coefficient. It is established that the real and imaginary parts of the wave oscillate by studying the nature of the evolution of the initial wave profile by the phase plane method. The transition of trajectories from an unstable focus to a limiting cycle, which corresponds to the oscillation of the real and imaginary parts, is shown. For the amplitude of the wave, such a transition is characterized by its amplification or attenuation (depending on the nonlinearity coefficient and the chosen initial conditions) up to a certain threshold value. It is shown that the time of the transition process from amplification (attenuation) to stabilization of the amplitude also depends on the nonlinearity parameter. It was found out that at the interval of amplification of the amplitude of the spin wave, the time of the transition process decreases, and lower amplitude values correspond to higher parameters of nonlinearity.

The article deals with the process of creating an effective algorithm for determining the amount of emitted quanta from an X-ray tube in computer tomography (CT) studies. An analysis of domestic and foreign literature showed that most of the work in the field of radiometry and radiography takes the tabulated values of X-ray absorption coefficients into account, while individual dose factors are not taken into account at all since many studies are lacking the Dose Report. Instead, an average value is used to simplify the calculation of statistics. In this regard, it was decided to develop a method to detect the amount of ionizing quanta by analyzing the noise of CT data. As the basis of the algorithm, we used Poisson and Gauss distribution mathematical model of owns’ design of logarithmic value. The resulting mathematical model was tested on the CT data of a calibration phantom consisting of three plastic cylinders filled with water, the X-ray absorption coefficient of which is known from the table values. The data were obtained from several CT devices from different manufacturers (Siemens, Toshiba, GE, Phillips). The developed algorithm made it possible to calculate the number of emitted X-ray quanta per unit time. These data, taking into account the noise level and the radiuses of the cylinders, were converted to X-ray absorption values, after which a comparison was made with tabulated values. As a result of this operation, the algorithm used with CT data of various configurations, experimental data were obtained, consistent with the theoretical part and the mathematical model. The results showed good accuracy of the algorithm and mathematical apparatus, which shows reliability of the obtained data. This mathematical model is already used in the noise reduction program of the CT of own design, where it participates as a method of creating a dynamic threshold of noise reduction. At the moment, the algorithm is being processed to work with real data from computer tomography of patients.