All issues

The article considers the mathematical aspects of the problem of identifying a multicomponent scattering medium based on pulsed multienergy X-ray irradiation data. X-ray diagnostics problems are of considerable interest from both theoretical and practical points of view, and radiographic methods are indispensable in non-destructive testing of products.

Within the framework of a mathematical model based on a non-stationary integro-differential equation of radiation transfer, the inverse problem of finding the attenuation coefficient for radiation known at the boundary of the region and the problem of identifying a substance based on the found values of the attenuation coefficient on a discrete set of irradiation energies of the medium are formulated.

A preliminary processing of a wide list of substances of interest in computed tomography was carried out to determine the possibility of their identification by an approximately specified radiation attenuation coefficient characterizing the medium. When analyzing the degree of proximity of substances in a certain norm, it was found that the set of all possible substances potentially contained in the medium is divided into a finite number of non-intersecting clusters. For a sufficiently short duration of the probing signal, the scattering component of the radiation leaving the medium is asymptotically small. This circumstance allows us to reduce the inverse problem for the radiation transfer equation to the problem of inverting the Radon transform from the attenuation coefficient. The possibility of unambiguous or partial identification of a substance by varying the duration of the probing pulse and the number of energy levels of irradiation of the medium is analyzed using numerical modeling methods on a specially developed digital phantom.

Amid the ongoing trend of rapid urbanization and the intensive development of megacities and large cities worldwide, the impact of man-made vibrations on residential structures and infrastructure is increasing. The operation of subway systems, construction using pile-driving and drilling equipment, and heavy traffic have become active sources of wave disturbances, which can be a decisive factor in reducing the structural stability of buildings and, consequently, their long-term reliability. This paper proposes a numerical calculation using the grid-characteristic method to model elastic waves propagating through soil layers and load-bearing structures from various sources. By solving the direct problem of numerical pulse simulation and varying its location, the values of velocity vector projections and components of the Cauchy stress tensor were obtained at each time step. Two scenarios were examined: the first simulates the impact of noise generated by construction work or nearby traffic, while the second demonstrates how a subway running through an underground tunnel affects multi-story residential buildings. Wave propagation patterns from these sources were visualized in terms of the parameters of interest, enabling a quick and convenient comprehensive analysis of the problem. The analysis of the obtained data will help adjust the timing and types of repair work, identify structural weak points, and develop innovative methods for preserving historical buildings that are cultural heritage sites. Additionally, it will allow for the most economically optimal construction of modern buildings near architectural landmarks, provide an efficient and safe action plan in emergencies, and modernize existing construction technologies to enhance the comfort of residential buildings, office structures, and other socially significant facilities. It will also aid in selecting the most suitable locations for modern high-precision manufacturing plants.

The paper presents a hybrid artificial neural network model based on an architecture that incorporates a convolutional image encoder (CNN) and an attention module (Attention-based Multiple Instance Learning, Attention MIL). This module aggregates informative features from a sequence of frames capturing the flame spraying process. Additional technological parameters—air pressure, propane pressure, and standoff distance — are integrated into the model via a tabular channel, enabling it to account for the relationship between visual data and numerical process regime characteristics. The software implementation was developed using the Streamlit platform and the PyTorch library. It features an interactive interface for model training and result visualization, analysis of attention weights across frames, and a prediction mode for output characteristics: surface roughness ($R_a$) and the mass of the deposited coating ($m$). Experimental studies were conducted on data from real-world technological processes, and a comparative analysis of the accuracy of various model configurations was performed. The results demonstrate that the hybrid neural network, which combines visual and tabular features, achieves higher prediction accuracy compared to models using only a single modality. Furthermore, when comparing different implementations of the hybrid network, it was established that using the attention mechanism to process the series of flame spray images provides a significant increase in accuracy over a simple averaging of features without attention. The application includes an attention visualization module that creates a montage of the most significant frames and displays their attention weights, allowing users to identify which frames had the greatest influence on the prediction. The model’s capability for export to the ONNX format for integration into process control systems is also demonstrated. The proposed approach showcases the effectiveness of fusing visual and tabular information for manufacturing process monitoring tasks. The model can serve as a foundation for developing a decision support system or an automated quality control system for coatings produced by flame spraying. The limitations of the implemented model and prospects for its further development are also considered.

This paper analyzes some issues in developing numerical methods for solving problems with a Boltzmann-type linear kinetic transport equation. Existing applications of this type of equation are listed. The focus is on the problem of radiative transfer in a flat layer, which are important for experimental research practice. Key definitions and traditional limitations applied to radiative transfer problems are presented. Some features of formulating radiative transfer problems for flat layers of irregular heterogeneous composite materials that are partially transparent to electromagnetic radiation are considered. The main approaches to the numerical and numerical-analytical solution of the linear kinetic transport equation are outlined.

Some variants of the simplest grid numerical methods for solving of nonstationary kinetic problems of transport a flat layer of a medium with strong attenuation are considered. Problems with one- and two-step variants of these iterative methods are analyzed, for some of them the causes of instability and convergence absence in some of them are investigated and established. It is shown that in the explicit conservative one-step method for a layer of a homogeneous absorbing, but neither radiating nor scattering, medium, unstable modes always exist in the spectrum of harmonic solutions. These modes arise in the region of radiation propagating almost parallel to the layer boundaries, and their instability increases with increasing attenuation effects and is caused by the presence of a small coefficient before the spatial derivative in the transport equation. To limit the undesirable influence of this component, various variants of splitting the equation into two and three fractional steps are considered.

It is shown that the most preferable options are those with explicitly organized fractional steps, for which a proof of their stability and convergence, that based on the Lax’s equivalence theorem is presented. It is demonstrated that the correct building of the fractional step sequence in explicit schemes for numerical solving of the nonstationary linear kinetic transport problems can provide additional stabilization, with the scattering integral plays an important role in stabilizing them. So, when solving kinetic transport problems in media with high scattering albedo, the explicit grid method of settling with splitting the iterations into three fractional steps, that were based on physical processes proved to be the simplest and most effective. The method is implemented as Matlab code, which performs quality control during the generation of the numerical solution process. The most significant modeling results are presented, confirming that the three-step method imposes relatively moderate requirements on resources and numerical integration accuracy, and ensures conditional convergence of iterations. Its mathematical correctness is confirmed by the behavior of the equation residuals and direct control of the convergence of numerical solutions. Its physical correctness is confirmed by ensuring, for ergodic systems, the property of convergence to an invariant steady state independent of the initial conditions. Some discovered and possible limitations of the method are listed.

The work will be useful to specialists in the field of mathematical modeling, numerical methods, kinetic theory, combined heat and mass transfer, dealing with issues of interpretation of experimental data, graduate students and senior students specializing in the indicated areas.

A mathematical model of fluid movement in the portal vein is considered. The fundamental circumstance determining the whole variety of portal hemodynamic phenomena is the absence of a valve apparatus. The flow direction is solely a function of the pressure gradient, and, therefore, it is fundamentally reversible when the boundary conditions of the system change.

Calculations were performed in the area representing a CT image fragment of the portal vein of a particular patient, which does not contain vascular bifurcations. The interpolation of patient Dopplerography data published in the press was used as boundary conditions for the flow. The calculations were carried out using the FlowVision industrial hydrodynamics software package. A comparison of calculations using the ideal fluid model and the Kuemada model of viscoplastic flow is carried out.

Calculations were performed for different values of the resistance coefficient corresponding to the physiological norm and with an increased value of the resistance coefficient.

At a normal value of the resistance coefficient, the flow in the portal vein is characterized by strong convective mixing.

As a result of calculations, it was found that when using the Kuemada model, the flow in the portal vein is stratified. The nature of the stratification depends on the hematocrit. At a normal value of the resistance coefficient, a plastic core of the flow is formed as the velocity decreases. With an increased value of the resistance coefficient during flow inversion, the flow core is also formed. When the flow is inverted, the plastic core continues to move in the forward direction, while the wall layers of the liquid begin to move in the opposite direction.

It is noted that in order to obtain correct modeling results, it is necessary to refine the blood composition of the portal vein and, possibly, refine the rheological model. Such information can be obtained both from comparing simulation data with clinical data, and by laboratory examination of portal vein blood.

The accurate characterization of particle size and morphology is crucial across numerous scientific and industrial fields. While microscopy is a powerful tool for visualizing particle geometry, traditional image analysis often relies on basic parameters like area and equivalent circular diameter, which are insufficient for describing non-spherical or complex particles. This paper presents a novel methodology for the analysis of particles from micrographs, combining deep learningbased segmentation with parametric polygon approximation. Optical microscopy images were obtained for model systems of increasing complexity: monodisperse polystyrene spheres, SAPO-34 cubes, ZSM-5 hexagonal prisms, and a multi-component mixture of all three. Neural network segmentation was performed using the DLgram01 cloud service, trained on manually annotated images. A custom Python program was developed to process the resulting segmentation polygons. The core of the method involves fitting a parameterized polygon to each segmented particle’s contour. The optimal value of geometric parameters for each particle is determined by minimizing a “dissimilarity” function that measures the discrepancy between the segmentation and the parametric shape. This approach was validated on the simple spherical system, yielding a size distribution consistent with conventional projected diameter methods. For more complex cubic SAPO-34 particles, the rectangle fit revealed deviations from the ideal shape, providing a more complete morphological description than using a single size parameter. In the mixture of particles, the method successfully classified and extracted distinct parameter distributions for each particle type. The results for each class in the mixture were statistically consistent with those obtained from the single-component systems, demonstrating the method’s robustness and accuracy. The proposed methodology provides a powerful and universal tool for automated, high-throughput particle analysis, enabling the extraction of detailed shape parameters and the construction of comprehensive size and morphology distributions for complex particulate systems.

The paper presents the methodology of «line-by-line» calculations of the Earth and atmosphere thermal radiation. Intensity of radiation is computed by numerical integration of the radiative transfer kinetic equation and the system of the angular momentum equations using quasi-diffusion method. Data from HITRAN molecular spectroscopic database [Rothman et al., 2009] are used to calculate the atmosphere optical parameters.

The article is dedicated to mathematic modeling of natural water desalination process by method of thermal distillation. The article gives the equations which allow describing the processes of film flowing and boiling of water, steam condensation and vacuum maintenance. The article presents the algorithm of calculation, implemented in MatLab computer mathematic system and Excel electronic tables, and the initial data required for the calculation. The model has been checked for adequacy. The calculation of ten-effect distillation system is given. The results of work can be used in design and optimization of process conditions for distillation systems.

The problem of accumulation and the statistical analysis of computer experiment results are solved. The main experiment program is considered as the data source. The results of main experiment are collected on specially prepared sheet Excel with pre-organized structure for the accumulation, statistical processing and visualization of the data. The created method and the program are used at efficiency research of the scientific researches which are carried out by authors.

The adequate complexity three-dimensional finite element model of biomechanical system with space, shell and beam-type elements was built. The model includes the Ilizarov fixator and tibial bone’s simulator with the regenerating tissue at the fracture location. The proposed model allows us to specify the orthotropic elastic properties of tibial bone model in cortical and trabecular zones. It is also possible to change the basic geometrical and mechanical characteristics of biomechanical system, change the finite element mash density and define the different external loads, such as pressure on the bone and compression or distraction between the repositioned rings of Ilizarov device.

By using special APDL ANSYS program macros the mode of deformation was calculated in the fracture zone for various static loads on the simulator bone, for compression or distraction between the repositioned rings and for various mechanical properties during different stages of the bone regenerate formation (gelatinous, cartilaginous, trabecular and cortical bone remodeling). The obtained results allow us to estimate the permissible values of the external pressure on the bone and of the displacements of the Ilizarov fixator rings for different stages of the bone regeneration, based on the admittance criterion for the maximum of the stresses in the callus. The presented data can be used in a clinical condition for planning, realization and monitoring of the power modes for transosseous osteosynthesis with the external Ilizarov fixator.