All issues

This paper examines the impact of the spatial resolution of a discretized (lattice) representation of the environment on the efficiency and correctness of optimal pathfinding in complex environments. Scenarios are considered that may include bottlenecks, non-uniform obstacle distributions, and areas of increased safety requirements in the immediate vicinity of obstacles. Despite the widespread use of lattice representations of the environment in robotics due to their compatibility with sensor data and support for classical trajectory planning algorithms, the resolution of these lattices has a significant impact on both goal reachability and optimal path performance. An algorithm is proposed that combines environmental connectivity analysis, trajectory optimization, and geometric safety refinement. In the first stage, the Leath algorithm is used to estimate the reachability of the target point by identifying a connected component containing the starting position. Upon confirmation of the target point’s reachability, the A* algorithm is applied to the nodes of this component in the second stage to construct a path that simultaneously minimizes both the path length and the risk of collision. In the third stage, a refined obstacle distance estimate is performed for nodes located in safety zones using a combination of the Gilbert – Johnson –Keerthi (GJK) and expanding polyhedron (EPA) algorithms. Experimental analysis revealed a nonlinear relationship between the probability of the existence and effectiveness of an optimal path and the lattice parameters. Specifically, reducing the spatial resolution of the lattice increases the likelihood of connectivity loss and target unreachability, while increasing its spatial resolution increases computational complexity without a proportional improvement in the optimal path’s performance.

The paper presents a cascade model of a physically supported neural network designed to predict pressure drop in three-phase flow (oil, gas, water) in a pipe section with various angles of inclination. To overcome the constraints of existing empirical correlations and computation-intensive numerical modeling methods, we propose an architecture that decomposes the problem into three sequential physically interpretable subtasks: regression prediction of the fluid hold-up coefficient, fluid flow regime classification, and pressure gradient evaluation. Each subtask is solved by a separate fully connected neural network, the output of which is passed to the next model in the cascade. Training and testing of the proposed architecture was performed on an extensive synthetic dataset (8 · 10⁷ records) generated using a semi-empirical model. Verification is performed on independent experimental data. A comparative analysis with a single fully connected (non-cascade) neural network is made, and the sensitivity of the models is examined using Sobol and Borgonovo methods. The cascade model demonstrates superior accuracy and ensures high interpretability of results by providing intermediate physical parameters (fluid hold-up coefficient, flow regime). The developed model has low computational complexity, which allows it to be used in real-time systems and digital twins of hydraulic systems in the oil and gas industry.

The approach to optimization of integral estimation of bio-systems state is presented. The approach is included the procedures of decreasing of variability of integral estimation based on statistical modeling of experimental data set and optimization the quantity of a state characteristics on a base of their relative contribution to the integral estimation using parallel calculation.

We consider two possible computational methods of the interpretation of experimental data obtained by means of the magnetic force microscopy. These methods of macrospin distribution simulation and reconstruction can be used for research of magnetization reversal processes of nanodots in ordered 2D arrays of nanodots. New approaches to the development of high-performance superscale algorithms for parallel executing on a supercomputer clusters for solving direct and inverse task of the modeling of magnetic states, types of ordering, reversal processes of nanosystems with a collective behavior are proposed. The simulation results are consistent with experimental results.

This paper presents a model mixture of probability distributions of signal and noise. Typically, when analyzing the data under conditions of uncertainty it is necessary to use nonparametric tests. However, such an analysis of nonstationary data in the presence of uncertainty on the mean of the distribution and its parameters may be ineffective. The model involves the implementation of a case of a priori non-parametric uncertainty in the processing of the signal at a time when the separation of signal and noise are related to different general population, is feasible.

This article is dedicated to numerical modeling of heat and mass transfer processes in microchannels. Microchannels are channels, that characteristic diameter is about 100 μm. Interest to the study of processes in them is growing every year, due to the rapid development of microfluid technique. The study was conducted using the software package σFlow. Isothermal and nonisothermal flows in microchannels of various configurations were considered. The obtained results were compared with available experimental and analytical data. In general for all problems a good agreement was obtained.

The number of papers addressing the forecasting of the infectious disease morbidity is rapidly growing due to accumulation of available statistical data. This article surveys the major approaches for the shortterm and the long-term morbidity forecasting. Their limitations and the practical application possibilities are pointed out. The paper presents the conventional time series analysis methods — regression and autoregressive models; machine learning-based approaches — Bayesian networks and artificial neural networks; case-based reasoning; filtration-based techniques. The most known mathematical models of infectious diseases are mentioned: classical equation-based models (deterministic and stochastic), modern simulation models (network and agent-based).

The article deals with the nonlinear model of population dynamics of different ages workers in the regional economy. The model is built on the principles underlying modeling in econophysics. The authors demonstrate the complex dynamics of the model regimes that impose fundamental limits on medium- and long-term forecast of employment in a region. By analogy with the biophysical approach the authors propose a classification of social interactions of the different age-group workers. The model analysis is given for the level of employment among age groups. The verification of the model performs on the statistical data of the Jewish Autonomous Region.

The Compact Muon Solenoid (CMS) is a high-performance general-purpose detector at the Large Hadron Collider (LHC) at CERN. A distributed data analysis system for processing and further analysis of CMS experimental data has been developed and this model foresees the obligatory usage of modern grid-technologies. The CMS Computing Model makes use of the hierarchy of computing centers (Tiers). The Joint Institute for Nuclear Research (JINR) takes an active part in the CMS experiment. In order to provide a proper computing infrastructure for the CMS experiment at JINR and for Russian institutes collaborating in CMS, Tier-1 center for the CMS experiment is constructing at JINR. The main tasks and services of the CMS Tier-1 at JINR are described. The status and perspectives of the Tier1 center for the CMS experiment at JINR are presented.

The practical application of nuclear medicine demonstrates the continued information deficiency of the algorithms and programs that provide visualization and analysis of medical images. The aim of the study was to determine the principles of optimizing the processing of planar osteostsintigraphy on the basis of сomputer aided diagnosis (CAD) for analysis of texture descriptions of images of metastatic zones on planar scintigrams of skeleton. A computer-aided diagnosis system for analysis of skeletal metastases based on planar scintigraphy data has been developed. This system includes skeleton image segmentation, calculation of textural, histogram and morphometrical parameters and the creation of a training set. For study of metastatic images’ textural characteristics on planar scintigrams of skeleton was developed the computer program of automatic analysis of skeletal metastases is used from data of planar scintigraphy. Also expert evaluation was used to distinguishing ‘pathological’ (metastatic) from ‘physiological’ (non-metastatic) radiopharmaceutical hyperfixation zones in which Haralick’s textural features were determined: autocorrelation, contrast, ‘forth moment’ and heterogeneity. This program was established on the principles of сomputer aided diagnosis researches planar scintigrams of skeletal patients with metastatic breast cancer hearths hyperfixation of radiopharmaceuticals were identified. Calculated parameters were made such as brightness, smoothness, the third moment of brightness, brightness uniformity, entropy brightness. It has been established that in most areas of the skeleton of histogram values of parameters in pathologic hyperfixation of radiopharmaceuticals predominate over the same values in the physiological. Most often pathological hyperfixation of radiopharmaceuticals as the front and rear fixed scintigramms prevalence of brightness and smoothness of the image brightness in comparison with those of the physiological hyperfixation of radiopharmaceuticals. Separate figures histogram analysis can be used in specifying the diagnosis of metastases in the mathematical modeling and interpretation bone scintigraphy. Separate figures histogram analysis can be used in specifying the diagnosis of metastases in the mathematical modeling and interpretation bone scintigraphy.