Результаты поиска по 'mathematical modelling':
Найдено статей: 368
  1. Skvortsova V.A., Abdullin R.R., Stepanova A.A.
    Optimisation of parameters and structure of a parallel spherical manipulator
    Computer Research and Modeling, 2023, v. 15, no. 6, pp. 1523-1534

    The paper is a study of the mathematical model and kinematics of a parallel spherical manipulator. This type of manipulator was proposed back in the 80s of the last century and has since found application in exoskeletons and rehabilitation robots due to its structure, which allows imitating natural joint movements of the human body.

    The Parallel Spherical Manipulator is a robot with three legs and two platforms, a base platform and a mobile platform. Its legs consist of two support links that are arc-shaped. Mathematically, the manipulator can be described using two virtual pyramids that are placed on top of each other.

    The paper considers two types of manipulator configurations: classical and asymmetric, and solves basic kinematic problems for each. The study shows that the asymmetric design of the manipulator has the maximum workspace, especially when the motors are mounted at the joints of the manipulator’s links inside legs.

    To optimize the parameters of the parallel spherical manipulator, we introduced a metric of usable workspace volume. This metric represents the volume of the sector of the sphere in which the robot does not experience internal collisions or singular states. There are three types of singular states possible within a parallel spherical manipulator — serial, parallel, and mixed singularity. We used all three types of singularities to calculate the useful volume. In our research work, we solved the problem related to maximizing the usable volume of the workspace.

    Through our research work, we found that the asymmetric configuration of the spherical manipulator maximizes the workspace when the motors are located at the articulation point of the robot leg support arms. At the same time, the parameter $\beta_1$ must be zero degrees to maximize the workspace. This allowed us to create a prototype robot in which we eliminated the use of lower links in legs in favor of a radiused rail along which the motors run. This allowed us to reduce the linear dimensions of the robot itself and gain on the stiffness of the structure.

    The results obtained can be used to optimize the parameters of the parallel spherical manipulator in various industrial and scientific applications, as well as for further research of other types of parallel robots and manipulators.

  2. Malikov Z.M., Nazarov F.K., Madaliev M.E.
    Numerical study of Taylor – Cuetta turbulent flow
    Computer Research and Modeling, 2024, v. 16, no. 2, pp. 395-408

    In this paper, the turbulent Taylor – Couette flow is investigated using two-dimensional modeling based on the averaged Navier – Stokes (RANS) equations and a new two-fluid approach to turbulence at Reynolds numbers in the range from 1000 to 8000. The flow due to a rotating internal and stationary external cylinders. The case of ratio of cylinder diameters 1:2 is considered. It is known that the emerging circular flow is characterized by anisotropic turbulence and mathematical modeling of such flows is a difficult task. To describe such flows, either direct modeling methods are used, which require large computational costs, or rather laborious Reynolds stress methods, or linear RANS models with special corrections for rotation, which are able to describe anisotropic turbulence. In order to compare different approaches to turbulence modeling, the paper presents the numerical results of linear RANS models SARC, SST-RC, Reynolds stress method SSG/LRR-RSM-w2012, DNS direct turbulence modeling, as well as a new two-fluid model. It is shown that the recently developed twofluid model adequately describes the considered flow. In addition, the two-fluid model is easy to implement numerically and has good convergence.

  3. Suganya G., Jenitta E., Senthamarai R.
    A study on the dynamics of pest population with biocontrol using predator, parasite in presence of awareness
    Computer Research and Modeling, 2024, v. 16, no. 3, pp. 713-729

    The coconut tree is often mentioned as the “tree of life” due to its immense benefits to the human community ranging from edible products to building materials. Rugose spiraling whitefly (RSW), a natural enemy seems to be a major threat to farmers in bringing up these coconut trees. A mathematical model to study the dynamics of pest population in the presence of predator and parasite is developed. The biologically feasible equilibrium points are derived. Local asymptotic stability as well as global asymptotic stability is analyzed at the points. Furthermore, in order to educate farmers on pest control, we have added the impact of awareness programs in the model. The conditions of existence and stability properties of all feasible steady states of this model are analyzed. The result reveals that predator and parasite play a major role in reducing the immature pest. It also shows that pest control activities through awareness programs further reduce the mature pest population which decreases the egg laying rate which in turn reduces the immature population.

  4. The article deals with the nonlinear boundary-value problem of hydrogen permeability corresponding to the following experiment. A membrane made of the target structural material heated to a sufficiently high temperature serves as the partition in the vacuum chamber. Degassing is performed in advance. A constant pressure of gaseous (molecular) hydrogen is built up at the inlet side. The penetrating flux is determined by mass-spectrometry in the vacuum maintained at the outlet side.

    A linear model of dependence on concentration is adopted for the coefficient of dissolved atomic hydrogen diffusion in the bulk. The temperature dependence conforms to the Arrhenius law. The surface processes of dissolution and sorptiondesorption are taken into account in the form of nonlinear dynamic boundary conditions (differential equations for the dynamics of surface concentrations of atomic hydrogen). The characteristic mathematical feature of the boundary-value problem is that concentration time derivatives are included both in the diffusion equation and in the boundary conditions with quadratic nonlinearity. In terms of the general theory of functional differential equations, this leads to the so-called neutral type equations and requires a more complex mathematical apparatus. An iterative computational algorithm of second-(higher- )order accuracy is suggested for solving the corresponding nonlinear boundary-value problem based on explicit-implicit difference schemes. To avoid solving the nonlinear system of equations at every time step, we apply the explicit component of difference scheme to slower sub-processes.

    The results of numerical modeling are presented to confirm the fitness of the model to experimental data. The degrees of impact of variations in hydrogen permeability parameters (“derivatives”) on the penetrating flux and the concentration distribution of H atoms through the sample thickness are determined. This knowledge is important, in particular, when designing protective structures against hydrogen embrittlement or membrane technologies for producing high-purity hydrogen. The computational algorithm enables using the model in the analysis of extreme regimes for structural materials (pressure drops, high temperatures, unsteady heating), identifying the limiting factors under specific operating conditions, and saving on costly experiments (especially in deuterium-tritium investigations).

  5. Shumov V.V.
    Special action and counter-terrorism models
    Computer Research and Modeling, 2024, v. 16, no. 6, pp. 1467-1498

    Special actions (guerrilla, anti-guerrilla, reconnaissance and sabotage, subversive, counter-terrorist, counter-sabotage, etc.) are organized and conducted by law enforcement and armed forces and are aimed at protecting citizens and ensuring national security. Since the early 2000s, the problems of special actions have attracted the attention of specialists in the field of modeling, sociologists, physicists and representatives of other sciences. This article reviews and characterizes the works in the field of modeling special actions and counterterrorism. The works are classified by modeling methods (descriptive, optimization and game-theoretic), by types and stages of actions, and by phases of management (preparation and conduct of activities). The second section presents a classification of methods and models for special actions and counterterrorism, and gives a brief overview of descriptive models. The method of geographic profiling, network games, models of dynamics of special actions, the function of victory in combat and special actions (the dependence of the probability of victory on the correlation of forces and means of the parties) are considered. The third section considers the “attacker – defender” game and its extensions: the Stackelberg game and the Stackelberg security game, as well as issues of their application in security tasks In the “attacker – defender” game and security games, known works are classified on the following grounds: the sequence of moves, the number of players and their target functions, the time horizon of the game, the degree of rationality of the players and their attitude to risk, the degree of awareness of the players. The fourth section is devoted to the description of patrolling games on a graph with discrete time and simultaneous choice by the parties of their actions (Nash equilibrium is computed to find optimal strategies). The fifth section deals with game-theoretic models of transportation security as applications of Stackelberg security games. The last section is devoted to the review and characterization of a number of models of border security in two phases of management: preparation and conduct of activities. An example of effective interaction between Coast Guard units and university researchers is considered. Promising directions for further research are the following: first, modeling of counter-terrorist and special operations to neutralize terrorist and sabotage groups with the involvement of multidepartmental and heterogeneous forces and means, second, complexification of models by levels and stages of activity cycles, third, development of game-theoretic models of combating maritime terrorism and piracy.

  6. In this paper, we consider predator – prey models and carry out a global bifurcation analysis of the Leslie –Gower system with an additive Allee effect and a simplified Holling type III functional response, which models the dynamics of predator and prey populations in a given ecological or biomedical system. This system uses the most common mathematical form of expressing the Allee effect (or law) through the prey growth function. Allee’s law states that there is a very specific relationship between individual fitness to living conditions and the number or density of individuals of a given species, namely: with an increase in the population size, the ability to survive and reproductive ability also increases. After algebraic transformations, the rational Leslie –Gower system with additive Allee effect and simplified Holling type III functional response can be written as a quantic-sextic dynamical system, i. e., as a system with polynomials of the fifth and sixth degrees. Using information about its singular points and applying our bifurcation-geometric approach to qualitative analysis, we study global bifurcations of limit cycles of the quintic-sextic system. To control all limit cycle bifurcations, especially bifurcations of multiple limit cycles, it is necessary to know the properties and combine the actions of all parameters rotating the vector field of the system. This can be done using the Wintner – Perko termination principle, according to which a maximal one-parameter family of multiple limit cycles terminates either at a singular point, which typically has the same multiplicity (cyclicity), or at a separatrix cycle, which also typically has the same multiplicity (cyclicity). This principle is a consequence of the principle of natural termination which was stated for higher-dimensional dynamical systems by Wintner who studied one-parameter families of periodic orbits of the restricted three-body problem and proved that in the analytic case any oneparameter family of periodic orbits can be uniquely continued through any bifurcation except a period-doubling bifurcation. Applying the planar Wintner – Perko principle, we prove that if the cyclicity of the focus in the system under consideration is three, then the system can have at most three limit cycles surrounding one singular point.

  7. Malkov S.Yu., Rubinstein A.A.
    The model of switching mode of reproduction with a continuous set of production subsystems under the conditions of balanced growth
    Computer Research and Modeling, 2025, v. 17, no. 3, pp. 501-519

    This paper presents new research results that have been conducted at the Institute of Economics of the Russian Academy of Sciences since 2011 under the leadership of Academician of the Russian Academy of Sciences V. I.Mayevsky. These works are aimed at developing the theory of switching mode of reproduction and corresponding mathematical models, the peculiarity of which is that they explicitly model the interaction of the financial and real sectors of the economy, and the country’s economy itself is not disaggregated according to the sectoral principle (engineering, agriculture, services, etc.), but by production subsystems that differ from each other by the age of the fixed capital. One of the mathematical difficulties of working with such models, called models of switching mode of reproduction (SMR), is the difficulty of modeling competitive relationships between subsystems of different “ages”. Therefore, until now, the interaction of a finite number of production subsystems has been considered in the SMR models, the models themselves were of a discrete-continuous nature, calculations were done exclusively on computers, and obtaining analytical dependencies was difficult. This paper shows that for the special case of balanced economic growth and a continuum of production subsystems, it is possible to obtain analytical expressions that allow a better understanding of the impact of monetary policy on economic dynamics. In addition to purely scientific interest, this is of great practical importance, since it allows us to assess the possible reaction of the real sector of the economy to changes in the monetary sphere without conducting complex simulation calculations.

  8. Orlova I.N., Golubtsova A.N., Orlov V.A., Orlov N.V.
    Research on the achievability of a goal in a medical quest
    Computer Research and Modeling, 2025, v. 17, no. 6, pp. 1149-1179

    The work presents an experimental study of the tree structure that occurs during a medical examination. At each meeting with a medical specialist, the patient receives a certain number of areas for consulting other specialists or for tests. A tree of directions arises, each branch of which the patient should pass. Depending on the branching of the tree, it can be as final — and in this case the examination can be completed — and endless when the patient’s goal cannot be achieved. In the work both experimentally and theoretically studied the critical properties of the transition of the system from the forest of the final trees to the forest endless, depending on the probabilistic characteristics of the tree.

    For the description, a model is proposed in which a discrete function of the probability of the number of branches on the node repeats the dynamics of a continuous gaussian distribution. The characteristics of the distribution of the Gauss (mathematical expectation of $x_0$, the average quadratic deviation of $\sigma$) are model parameters. In the selected setting, the task refers to the problems of branching random processes (BRP) in the heterogeneous model of Galton – Watson.

    Experimental study is carried out by numerical modeling on the final grilles. A phase diagram was built, the boundaries of areas of various phases are determined. A comparison was made with the phase diagram obtained from theoretical criteria for macrosystems, and an adequate correspondence was established. It is shown that on the final grilles the transition is blurry.

    The description of the blurry phase transition was carried out using two approaches. In the first, standard approach, the transition is described using the so-called inclusion function, which makes the meaning of the share of one of the phases in the general set. It was established that such an approach in this system is ineffective, since the found position of the conditional boundary of the blurred transition is determined only by the size of the chosen experimental lattice and does not bear objective meaning.

    The second, original approach is proposed, based on the introduction of an parameter of order equal to the reverse average tree height, and the analysis of its behavior. It was established that the dynamics of such an order parameter in the $\sigma = \text{const}$ section with very small differences has the type of distribution of Fermi – Dirac ($\sigma$ performs the same function as the temperature for the distribution of Fermi – Dirac, $x_0$ — energy function). An empirical expression has been selected for the order parameter, an analogue of the chemical potential is introduced and calculated, which makes sense of the characteristic scale of the order parameter — that is, the values of $x_0$, in which the order can be considered a disorder. This criterion is the basis for determining the boundary of the conditional transition in this approach. It was established that this boundary corresponds to the average height of a tree equal to two generations. Based on the found properties, recommendations for medical institutions are proposed to control the provision of limb of the path of patients.

    The model discussed and its description using conditionally-infinite trees have applications to many hierarchical systems. These systems include: internet routing networks, bureaucratic networks, trade and logistics networks, citation networks, game strategies, population dynamics problems, and others.

  9. Gimaltdinov I.K., Rodionov A.S.
    Numerical modeling of the occurrence of a stress peak during the reflection of a shock wave pulse from a granular porous medium
    Computer Research and Modeling, 2026, v. 18, no. 2, pp. 359-375

    The study of elastic waves in porous media is relevant for mineral exploration, the use of porous screens for shock wave damping, and the study of the structure of the earth’s crust. The elastic properties of a porous medium, which can be judged by the propagation velocity of various types of waves, depend on the degree of consolidation of the porous medium. For example, bulk media (sand, glass beads, granular materials) have a low sound velocity (about 100 m/s); compaction of such media is accompanied by a slight increase in velocity, while their consolidation (sandstone, gas hydrate cementation) leads to a multiple increase in the acoustic wave velocity, on the order of 2000–3000 m/s. This paper theoretically investigates the dynamics of a wave pulse in a shock tube containing a layer of a bulk medium. Numerical modeling was performed under experimental conditions. A description of a shock tube experimental setup is provided. The setup consists of a high-pressure volume (HPV), a low-pressure volume (LPV), and a bulk medium section. A shock wave pulse (SWP) is generated by the rupture of a diaphragm between the HPV and LPV. The SWP dynamics are recorded by piezoelectric sensors located flush on the inside of the tube. In the shock tube, equipped with a bulk medium section, the wave experiences multiple reflections from the surface of the porous medium under study and the upper end of the tube. The reflected signals are used as probe pulses to study changes in the porous medium caused by repeated passages of the shock wave pulse, with a period of approximately 10 ms. A mathematical model is used that includes the equations of conservation of mass, momentum, and energy for the gas phase and solid particles with closure relations. The process is described for one-dimensional planar motion of the gas and dispersed phases. The numerical solution utilizes an approximation of the equations based on the control volume method. Numerical results have shown that the proposed model accurately describes, qualitatively and quantitatively, the occurrence of a sharp, short-term increase in the total voltage (peak) during repeated pulse passage through a layer of bulk material, as observed in experiments.

  10. Pirogov A.A.
    Application of beta regression to the CD44 alternative splicing problem
    Computer Research and Modeling, 2026, v. 18, no. 3, pp. 697-714

    Aberrant alternative splicing of the CD44 gene drives colorectal cancer progression and facilitates the emergence of cancer stem cells. Although biomedical research recognizes this transmembrane glycoprotein as a major catalyst of malignancy, deciphering its multi-isoform regulatory networks remains a complex analytical challenge. To address this knowledge gap, this study presents a machine learning framework designed to decode these biological mechanisms. The author constructed a neural network regressor based on beta regression to model bounded isoform proportions. This computational architecture jointly estimates both the mean and the precision parameters of the underlying probability distribution. Furthermore, the system employs elastic net regularization to perform quantitative feature selection from highdimensional molecular expression data.

    The investigation evaluates the proposed framework using gene expression profiles from colorectal cancer patients. The primary objective involves identifying specific ribonucleic acid-binding proteins acting as regulatory splicing factors. The experimental design contrasts two distinct mathematical modeling strategies. The first configuration incorporates an independent ”one-vs-all” approach that treats each transcript variant as an isolated regression target. The second formulation utilizes a structured ”isoform tree” method that directly mirrors hierarchical exon inclusion relationships. Validation experiments on synthetically generated datasets confirmed the mathematical integrity of the network. The model recovered true distribution parameters with precision and exhibited no systematic bias. Comprehensive empirical comparisons subsequently demonstrated that the independent ”one-vs-all” layout consistently outperforms the hierarchical tree configuration in predictive stability and accuracy.

    The computational analysis maps the regulatory landscape of the CD44 gene. The framework validates several established splicing factors while uncovering new candidate proteins, including ACO1, NUDT21, and AGO2. Based on these statistical associations, the paper introduces a biological hypothesis. This concept functionally connects intracellular iron metabolism via the ACO1 protein with the shifting balance of CD44 variants. These discoveries provide deeper insights into oncogenic splicing regulation. Ultimately, they highlight molecular targets for future therapeutic interventions aimed at suppressing the cancer stem cell phenotype.

Pages: « first previous next last »

Indexed in Scopus

Full-text version of the journal is also available on the web site of the scientific electronic library eLIBRARY.RU

The journal is included in the Russian Science Citation Index

The journal is included in the RSCI

International Interdisciplinary Conference "Mathematics. Computing. Education"