All issues

A compact finite difference scheme has been developed for modeling convection in a porous medium saturated with a fluid. We consider the problem for a rectangular domain with anisotropic permeability and thermal conductivity properties in terms of stream function and temperature deviation, taking into account Darcy's law. Boundary conditions of impenetrability and a linear distribution of temperature are set. This model is cosymmetric when certain conditions are imposed on the permeability and thermal conductivities. One parametric family of stationary convection regimes arises when mechanical equilibrium loses stability. A numerical method with a fourth-order finite difference approximation for spatial variables and a Runge – Kutta integrator for time has been developed. It has been proved that this scheme preserves cosymmetry. Numerical results for evaluating the critical Rayleigh number have been presented. We compare them with results obtained using a second-order finite-difference method. We show that critical Rayleigh numbers are repeated twice with very high accuracy, which proves cosymmetry preservation. Numerical evaluation of convective regimes and spectral properties are presented. The efficiency of the developed compact finite difference scheme on a nine-point stencil is assessed.

Searching optimal trajectory of motion is a complex problem that is investigated in many research studies. Most of the studies investigate methods that are applicable to such a problem in general, regardless of the model of the object. With such general approach, only numerical solution can be found. However, in some cases it is possible to find an optimal trajectory in a closed form. Current article considers a time optimal problem with state limitations for a wheeled mobile differential robot that moves on a horizontal plane. The mathematical model of motion is kinematic. The state constraints correspond to the obstacles on the plane defined as circles that need to be avoided during motion. The independent control inputs are the wheel speeds that are limited in absolute value. Such model is commonly used in problems where the transients are considered insignificant, for example, when controlling tracked or wheeled devices that move slowly, prioritizing traction power over speed. In the article it is shown that the optimal trajectory from the starting point to the finishing point in such kinematic approach is a sequence of straight segments of tangents to the obstacles and arcs of the circles that limit the obstacles. The geometrically shortest path between the start and the finish is also a sequence of straight lines and arcs, therefore the time-optimal trajectory corresponds to one of the local minima when searching for the shortest path. The article proposes a method of search for the time-optimal trajectory based on building a graph of possible trajectories, where the edges are the possible segments of the tajectory, and the vertices are the connections between them. The optimal path is sought using Dijkstra’s algorithm. The theoretical foundation of the method is given, and the results of computer investigation of the algorithm are provided.

The article presents updated technologies for solving two classes of linear resource allocation problems with dynamically changing characteristics of situational management systems and awareness of experts (and/or trained robots). The search for solutions is carried out in an interactive mode of computational experiment using updatable knowledge systems about problems considered as constructive objects (in accordance with the methodology of formalization of knowledge about programmable problems created in the theory of S-symbols). The technologies are focused on implementation in the form of Internet services. The first class includes resource allocation problems solved by the method of targeted solution movement. The second is the problems of allocating a single resource in hierarchical systems, taking into account the priorities of expense items, which can be solved (depending on the specified mandatory and orienting requirements for the solution) either by the interval method of allocation (with input data and result represented by numerical segments), or by the targeted solution movement method. The problem statements are determined by requirements for solutions and specifications of their applicability, which are set by an expert based on the results of the portraits of the target and achieved situations analysis. Unlike well-known methods for solving resource allocation problems as linear programming problems, the method of targeted solution movement is insensitive to small data changes and allows to find feasible solutions when the constraint system is incompatible. In single-resource allocation technologies, the segmented representation of data and results allows a more adequate (compared to a point representation) reflection of the state of system resource space and increases the practical applicability of solutions. The technologies discussed in the article are programmatically implemented and used to solve the problems of resource basement for decisions, budget design taking into account the priorities of expense items, etc. The technology of allocating a single resource is implemented in the form of an existing online cost planning service. The methodological consistency of the technologies is confirmed by the results of comparison with known technologies for solving the problems under consideration.

This paper is devoted to the problem of edge criticality identification and ranking in complex networks, which is a part of a modern research direction in the novel network science. The diffusion importance belongs to the set of acknowledged methods that help to identify the significant connections in the graph that are critical to retaining structural integrity. In the present work, we develop the Iterative Diffusion Importance algorithm that is based on the re-estimation of critical topological features at each step of the graph deconstruction. The Iterative Diffusion Importance has been compared with methods such as diffusion importance and degree product, which are two very well-known benchmark algorithms. As for benchmark networks, we tested the Iterative Diffusion Importance on three standard networks, such as Zachary’s Karate Club, the American Football Network, and the Dolphins Network, which are often used for algorithm efficiency evaluation and are different in size and density. Also, we proposed a new benchmark network representing the airplane communication between Japan and the US. The numerical experiment on finding the ranking of critical edges and the following network decomposition demonstrated that the proposed Iterative Diffusion Importance exceeds the conventional diffusion importance by the efficiency for 2–35% depending on the network complexity, the number of nodes, and the number of edges. The only drawback of the Iterative Diffusion Importance is an increase in computation complexity and hencely in the runtime, but this drawback can be easily compensated for by the preliminary planning of the network deconstruction or protection and by reducing the re-evaluation frequency of the iterative process.

This paper addresses the problem of the plane-parallel motion of an elliptic foil with an attached point vortex of constant strength in an ideal fluid. It is assumed that the position of the vortex relative to the foil remains unchanged during motion. The flow of the fluid outside the body is assumed to be potential (except for the singularity corresponding to a point vortex), and the flow around the body is noncirculatory. Special attention is given to the general position case in which the point vortex does not lie on the continuations of the semiaxes of the ellipse. The problem under consideration is described by a system of six first-order differential equations. After reduction by the motion group of the plane E(2) it reduces to a system of three differential equations. An analysis of this reduced system is made. It is shown that this system admits one to five fixed points which correspond to motions of the ellipse in various circles. By numerically investigating the phase flow of the reduced system near fixed points, it is shown that, in the general case, the system admits no invariant measure with a smooth positive definite density. Parameter values are found for which one of the fixed points of the reduced system is an unstable node-focus. It is shown that, as the variation of the parameters is continued, an unstable limit cycle can arise from an unstable fixed point via an Andronov – Hopf bifurcation. An analysis is made of bifurcations of this limit cycle for the case where the position of the point vortex relative to the ellipse changes. By constructing a parametric bifurcation diagram, it is shown that, as the system’s parameters are varied, the limit cycle undergoes a cascade of period-doubling bifurcations, giving rise to a chaotic repeller (a reversed-time attractor). To carry out a numerical analysis of the problem, the method of constructing a twodimensional Poincaré map is used. The search for and analysis of simple and strange repellers were performed backward in time.

This paper presents a systematic study of the application of convolutional neural networks (CNNs) as an efficient tool for the analysis of critical and low-temperature phase states in two dimensional spin system models. The problem of calculating the dependence of the average energy $\langle E\rangle_T^{}$ on the spatial distribution of exchange integrals $J_k^{}$ for the Edwards – Anderson model on a square lattice with frustrated interactions is considered.

We further construct a single convolutional classifier of phase states of the ferromagnetic Ising model on square, triangular, honeycomb, and kagome lattices, trained on configurations generated by the Swendsen – Wang cluster algorithm. Сomputed temperature profiles of the averaged posterior probability of the high-temperature phase, form clear S-shaped curves that intersect in the vicinity of the theoretical critical temperatures and allow one to determine $T_c^{}$ for the kagome lattice without additional retraining.

It is shown that convolutional models substantially reduce the root-mean-square error (RMSE) compared with fully connected architectures and efficiently capture complex correlations between thermodynamic characteristics and the structure of magnetic correlated systems.

Explainable Artificial Intelligence (XAI) is a field of artificial intelligence aimed at creating methods and tools for generating interpretable and human-understandable explanations of AI decisions. The relevance of model explainability increases with the deployment of artificial intelligence in critical domains (healthcare, finance, law), where algorithmic opacity can lead to serious consequences for users and society. This work presents an analytical review of the current state of the XAI field, covering theoretical foundations, methodology, and practical applications.

The examined explainable AI methods were selected and systematized based on a multi-level classification of XAI methods by problem formulation (goal, target audience, data type), methodology (application stage, model-specificity, methods, scale), and result form (representation, presentation, evaluation metrics).

A comparative analysis of explainable AI methods for various application domains is conducted. For classical machine learning, SHAP and LIME are examined in detail, revealing their theoretical foundations, computational characteristics, and limitations. For computer vision, gradient-based methods (SmoothGrad, Integrated Gradients), activation visualization methods (Grad-CAM, Grad-CAM++), perturbation-based methods (RISE, Occlusion), and conceptual explanations (TCAV, Network Dissection) are systematized. Special attention is paid to the specifics of applying XAI to natural language processing and large language models, including analysis of the faithfulness of Chain-of-Thought reasoning, natural language explanations, and attribution graph methods. Fundamental limitations of existing approaches to LLM explainability are identified and directions for future research are defined.

The review results demonstrate that XAI methods have reached significant maturity in classical machine learning and computer vision, however, their application to large language models remains an open research problem requiring the development of new explanation paradigms.

Тhe aim of this work is to assess the mechanical behavior of coronary vessels and angioplasty balloons during the angioplasty procedure, based on intravascular ultrasound (IVUS) and angiography data obtained for each patient individually. To treat atherosclerosis, a serious chronic inflammatory disease of the arteries characterized by the formation of atherosclerotic plaques, which causes vessel narrowing and impairs blood supply to tissues and organs, modern medical practice employs a minimally invasive endovascular procedure known as balloon angioplasty. Key aspects of modeling this procedure include understanding the behavior of patients’ arteries and the balloons used during the intervention. Based on intravascular ultrasound and angiography data, a biomechanical model of an artery affected by atherosclerosis is developed. A finite element model of the arterial segment is constructed, accounting for its nonlinear hyperelastic behavior. To simulate the behavior of the angioplasty balloon, a mathematical model of the balloon is developed and validated against experimental data. An assessment of the stress-strain state of a specific patient’s coronary artery and angioplasty balloon is performed. For a full-scale simulation of the angioplasty process, a mathematical model is developed that incorporates all three objects considered above: personalization of the artery model through the use of real patient data; a finite element model of the artery built based on of the personalized model, accounting for its nonlinear behavior; a finite element model of the angioplasty balloon. The developed mathematical models and the results obtained from them will further allow us to derive dependencies of key angioplasty parameters. These dependencies can be used to improve angioplasty techniques based on intravascular imaging data. Furthermore, the application of mathematical modeling methods will help reduce the number of clinical trials in this field.

This article proposes a numeric method of solution of quasilinear parabolic equations, based on the flux approximation, describes the implementation of the method on a rectangular grid and presents numerical results. Unlike methods used in common practice, this method uses an approximation of flows in non-dilated template. For each iteration of the Newton method it is possible to solve a linear problem using the method of upper relaxation (SOR). Compared with the methods of flux sweeping, the considered method has greater potential for use in modern parallel computing system.

Statement of a problem of management of movement of a body in a viscous liquid is given. Movement bodies it is induced by moving of internal material points. On a basis the numerical decision of the equations of movement of a body and the hydrodynamic equations approximating dependencies for viscous forces are received. With application approximations the problem of optimum control of body movement dares on the set trajectory with application of hybrid genetic algorithm. Possibility of the directed movement of a body under action is established back and forth motion of an internal point. Optimum control movement direction it is carried out by motion of other internal point on circular trajectory with variable speed.