All issues

The rheological behavior of aqueous suspensions based on nanoscale silicon dioxide particles strongly depends on the dynamic viscosity, which affects directly the use of nanofluids. The purpose of this work is to develop and validate models for predicting dynamic viscosity from independent input parameters: silicon dioxide concentration SiO₂, pH acidity, and shear rate $\gamma$. The influence of the suspension composition on its dynamic viscosity is analyzed. Groups of suspensions with statistically homogeneous composition have been identified, within which the interchangeability of compositions is possible. It is shown that at low shear rates, the rheological properties of suspensions differ significantly from those obtained at higher speeds. Significant positive correlations of the dynamic viscosity of the suspension with SiO₂ concentration and pH acidity were established, and negative correlations with the shear rate $\gamma$. Regression models with regularization of the dependence of the dynamic viscosity $\eta$ on the concentrations of SiO₂, NaOH, H₃PO₄, surfactant (surfactant), EDA (ethylenediamine), shear rate γ were constructed. For more accurate prediction of dynamic viscosity, the models using algorithms of neural network technologies and machine learning (MLP multilayer perceptron, RBF radial basis function network, SVM support vector method, RF random forest method) were trained. The effectiveness of the constructed models was evaluated using various statistical metrics, including the average absolute approximation error (MAE), the average quadratic error (MSE), the coefficient of determination $R^2$, and the average percentage of absolute relative deviation (AARD%). The RF model proved to be the best model in the training and test samples. The contribution of each component to the constructed model is determined. It is shown that the concentration of SiO₂ has the greatest influence on the dynamic viscosity, followed by pH acidity and shear rate γ. The accuracy of the proposed models is compared to the accuracy of models previously published. The results confirm that the developed models can be considered as a practical tool for studying the behavior of nanofluids, which use aqueous suspensions based on nanoscale particles of silicon dioxide.

The paper considers the application of swarm intelligence technology to build agent-based simulation models. As an example, a minimal model is constructed illustrating the influence of information influences on the rules of behavior of agents in the simplest model of competition between two populations, whose agents perform the simplest task of transferring a resource from a mobile source to their territory. The algorithm for the movement of agents in the model space is implemented on the basis of the classical particle swarm algorithm. Agents have a life cycle, that is, the processes of birth and death are taken into account. The model takes into account information processes that determine the target functions of the behavior of newly appeared agents. These processes (training and poaching) are determined by information influences from populations. Under certain conditions, a third population arises in the agent system. Agents of such a population informatively influence agents of other populations in a certain radius around themselves, changing.

As a result of the conducted simulation experiments, it was shown that the following final states are realized in the system: displacement of a new population by others, coexistence of a new population and other populations and the absence of such a population. It has been shown that with an increase in the radius of influence of agents, the population with changed rules of behavior displaces all others. It is also shown that in the case of a hard-to-access resource, the strategy of luring agents of a competing population is more profitable.

As it stands in the contemporary world, compliance with regulations concerning data protection such as GDPR is central to organizations. Another important issue analysis identified is the fact that compliance is hampered by the fact that legal documents are often complex and that regulations are ever changing. This paper aims to describe the ways in which NLP aids in keeping GDPR compliance effortless through automated scanning for compliance, evaluating privacy policies, and increasing the level of transparency. The work does not only limit to exploring the application of NLP for dealing with the privacy policies and facilitate better understanding of the third-party data sharing but also proceed to perform the preliminary studies to evaluate the difference of several NLP models. They implement and execute the models to distinguish the one that performs the best based on the efficiency and speed at which it automates the process of compliance verification and analyzing the privacy policy. Moreover, some of the topics discussed in the research deal with the possibility of using automatic tools and data analysis to GDPR, for instance, generation of the machine readable models that assist in evaluation of compliance. Among the evaluated models from our studies, SBERT performed best at the policy level with an accuracy of 0.57, precision of 0.78, recall of 0.83, and F1-score of 0.80. BERT showed the highest performance at the sentence level, achieving an accuracy of 0.63, precision of 0.70, recall of 0.50, and F1-score of 0.55. Therefore, this paper emphasizes the importance of NLP to help organizations overcome the difficulties of GDPR compliance, create a roadmap to a more client-oriented data protection regime. In this regard, by comparing preliminary studies done in the test and showing the performance of the better model, it helps enhance the measures taken in compliance and fosters the defense of individual rights in the cyberspace.

Epidemics severely destabilize economies by reducing productivity, weakening consumer spending, and overwhelming public infrastructure, often culminating in economic recessions. The COVID-19 pandemic underscored the critical role of nonpharmaceutical interventions, such as lockdowns, in containing infectious disease transmission. This study investigates how the progression of epidemics and the implementation of lockdown policies shape the economic well-being of populations. By integrating compartmental ordinary differential equation (ODE) models, the research analyzes the interplay between epidemic dynamics and economic outcomes, particularly focusing on how varying lockdown intensities influence both disease spread and population wealth. Findings reveal that epidemics inflict significant economic damage, but timely and stringent lockdowns can mitigate healthcare system overload by sharply reducing infection peaks and delaying the epidemic’s trajectory. However, carefully timed lockdown relaxation is equally vital to prevent resurgent outbreaks. The study identifies key epidemiological thresholds—such as transmission rates, recovery rates, and the basic reproduction number $(\mathfrak{R}0)$ — that determine the effectiveness of lockdowns. Analytically, it pinpoints the optimal proportion of isolated individuals required to minimize total infections in scenarios where permanent immunity is assumed. Economically, the analysis quantifies lockdown impacts by tracking population wealth, demonstrating that economic outcomes depend heavily on the fraction of isolated individuals who remain economically productive. Higher proportions of productive individuals during lockdowns correlate with better wealth retention, even under fixed epidemic conditions. These insights equip policymakers with actionable frameworks to design balanced lockdown strategies that curb disease spread while safeguarding economic stability during future health crises.

Optimization of antitumor radiotherapy represents an urgent issue, as approximately half of the patients diagnosed with cancer undergo radiotherapy during their treatment. Proton therapy is potentially more efficient than traditional X-ray radiotherapy due to fundamental differences in physics of dose deposition, leading to better targeting of tumors and less collateral damage to healthy tissue. There is increasing interest in the use of non-radioactive radiosensitizing tumor-specific nanoparticles the use of which can boost the performance of proton therapy. Such nanoparticles are small volumes of a sensitizer, such as boron-10 or various metal oxides, enclosed in a polymer layer containing tumor-specific antibodies, which allows for their targeted delivery to malignant cells. Furthermore, a combination of proton therapy with antiangiogenic therapy that normalizes tumor-associated microvasculature may yield further synergistic increase in overall treatment efficacy.

We have developed a spatially distributed mathematical model simulating the growth of a non-invasive tumor undergoing treatment by fractionated proton therapy with nanosensitizers and antiangiogenic therapy. The modeling results suggest that the most effective way to combine these treatment modalities should strongly depend on the tumor cells’ proliferation rate and their intrinsic radiosensitivity. Namely, a combination of antiangiogenic therapy with proton therapy, regardless of whether radiosensitizing nanoparticles are used, benefits treatment efficacy of rapidly growing tumors as well as radioresistant tumors with moderate growth rate. In these cases, administration of proton therapy simultaneously with antiangiogenic drugs after the initial single injection of nanosensitizers is the most effective option among those analyzed. Conversely, for slowly growing tumors, maximization of the number of nanosensitizer injections without antiangiogenic therapy proves to be a more efficient option, with enhancement in treatment efficacy growing with the increase of tumor radiosensitivity. However, the results also show that the overall efficacy of proton therapy is likely to increase only modestly with the addition of nanosensitizers and antiangiogenic drugs.

This study proposes and analyzes a discrete-time mathematical model of population dynamics with seasonal reproduction, taking into account the density-dependent regulation and sex structure. In the model, population birth rate depends on the number of females, while density is regulated through juvenile survival, which decreases exponentially with increasing total population size. Analytical and numerical investigations of the model demonstrate that when more than half of both females and males survive, the population exhibits stable dynamics even at relatively high birth rates. Oscillations arise when the limitation of female survival exceeds that of male survival. Increasing the intensity of male survival limitation can stabilize population dynamics, an effect particularly evident when the proportion of female offspring is low. Depending on parameter values, the model exhibits stable, periodic, or irregular dynamics, including multistability, where changes in current population size driven by external factors can shift the system between coexisting dynamic modes. To apply the model to real populations, we propose an approach for estimating demographic parameters based on total abundance data. The key idea is to reduce the two-component discrete model with sex structure to a delay equation dependent only on total population size. In this formulation, the initial sex structure is expressed through total abundance and depends on demographic parameters. The resulting one-dimensional equation was applied to describe and estimate demographic characteristics of ungulate populations in the Jewish Autonomous Region. The delay equation provides a good fit to the observed dynamics of ungulate populations, capturing long-term trends in abundance. Point estimates of parameters fall within biologically meaningful ranges and produce population dynamics consistent with field observations. For moose, roe deer, and musk deer, the model suggests predominantly stable dynamics, while annual fluctuations are primarily driven by external factors and represent deviations from equilibrium. Overall, these estimates enable the analysis of structured population dynamics alongside short-term forecasting based on total abundance data.

In recent decades, the introduction of biophotonics and quantum electronics advance into medical practice led to the development of new diagnostic and therapeutic approaches for many diseases. In the field of oncology, photodynamic therapy (PDT) is successfully used today in the treatment of various types of cancer. Along with further improvement of PDT, the development of direct laser therapy is currently underway, in which the generation of singlet oxygen molecules ($^{1}$О$_2^{}$) in cancer cells occurs under NIR laser irradiation with a wavelength of $\lambda=1267$ nm without the need to introduce photosensitizers into the patient's body. For the purpose of a~theoretical investigation of the direct effect of NIR laser irradiation on cancer cells and the description of a~large set of experimental data, a mathematical model has been developed. The model includes the main cellular processes activated in cancer cells by NIR laser irradiation that determine the effectiveness of its cytotoxic effect on cancer cells. As a result of modeling, the rate of $^{1}$О$_2^{}$ generation under NIR laser irradiation was estimated, and the kinetics of active oxygen species (ROS) molecules was described. The ROS degradation due to the action of the antioxidant system of cell protection was taken into account in the model. It was shown that NIR laser irradiation induces lipid peroxidation that leads to cellular membrane damage and cell death through ferroptosis. As a result of modeling, it was established that a cascade of free-radical and enzymatic reactions of ROS transformation and accumulation leads to a prolonged response of cervical adenocarcinoma cells HeLa to the action of laser irradiation with $\lambda=1267$ nm, during which oxidative stress develops, causing cancer cell death through apoptosis and ferroptosis.

The paper presents a computational model of the thermal state of the breast with an interstitial tumor. The model is based on the modified Pennes biothermal equation and describes a five-layered biological area including skin, subcutaneous fat, glandular and muscular tissues, as well as a neoplasm zone. Convective heat exchange with the environment is taken into account at the outer boundary, and body temperature is maintained at the internal boundary. In addition, the fabric surface is exposed to exponentially attenuating effects of spatial heating, such a heating scheme is actually based on the Bouguer – Lambert – Baer law. Tissue thermal conductivity and blood perfusion are modeled by linear functions of temperature, reflecting physiological thermoregulation. The boundary-value problem for the partial differential equation has been solved numerically using an explicit-implicit finite difference scheme; the system of algebraic equations getting after an approximation of the mentioned boundary-value problem is solved by the Thomas procedure. Numerical experiments have shown that even a small tumor increases the local temperature of tissues by half a degree due to increased metabolism and delayed blood perfusion. This anomaly is clearly manifested in tumors larger than ten millimeters. It was found that the depth of occurrence critically affects the thermal response: when the tumor is located closer to the surface, the maximum temperature shifts to the skin, whereas at a deeper position, a thermal peak forms inside the glandular tissue. The effectiveness of hyperthermic exposure was assessed by the integral criterion of thermal necrosis based on the Arrhenius law. At a radiation intensity that creates a surface thermal load of about five kilowatts per square meter and an attenuation factor of one hundred, tumor destruction begins after two to three minutes of exposure, while the surrounding healthy tissues remain within safe temperatures. Reducing the attenuation coefficient leads to the opposite effect: heat spreads deeper, and the glandular tissue is damaged first, which limits the therapeutic window. Additionally, maps of the distribution of temperature, time to necrosis, and the depth of thermal damage were constructed depending on the irradiation power, diameter, and position of the tumor.

Laser polishing is a promising technology for the finishing of fused quartz (fused silica or quartz glass) products, enabling the removal of subsurface defects induced by mechanical processing. However, the complexity and nonlinearity of the physical processes occurring during laser irradiation complicate the selection of optimal technological parameters. The present paper aims to develop, comparatively analyze, and apply high-precision predictive models for forecasting and optimizing the key performance indicators of the laser polishing process for quartz glass. A verified finite element model implemented in the ANSYS software environment produced a dataset of temperature and stress fields for various combinations of process parameters. This dataset was used to develop and validate four types of predictive models: Polynomial Regression, a Fuzzy Logic System, an Adaptive Neuro-Fuzzy Inference System (ANFIS), and a Multilayer Perceptron (MLP) neural network. The models’ quality was evaluated on a test set using the statistical metrics MAE, RMSE, MAPE, $R^2$, and  $R^2_{Adj}$. A comparative analysis of the models revealed the significant superiority of the MLP neural network, which demonstrated the highest prediction accuracy for all output parameters, achieving Adjusted $R^2$ ($R^2_{Adj}$.) values above 0.97 and a Mean Absolute Percentage Error (MAPE) in the range of 0.7–2.8%. This model was effectively utilized as a surrogate function in combination with a genetic algorithm to successfully identify the optimal process parameters. The constructed MLP neural network model functions as a reliable and high-precision tool, facilitating both prediction and the optimization of fused quartz polishing outcomes using a CO₂ laser. This approach effectively approximates the complex nonlinear dependencies inherent in the process and can serve as a foundation for developing intelligent control and optimization systems for this technology.

The paper continues our series of papers [1-4] devoted to the development of mathematical model on rotation of F₁-AТPase molecular motor. Here it has been considered the synthesis of ATP induced by external force applied to the rotor.