All issues

The efficiency of mobile robotic systems (MRS) that monitor the traffic situation, urban infrastructure, consequences of emergency situations, etc., directly depends on the quality of vision systems, which are the most important part of MRS. In turn, the accuracy of image processing in vision systems depends to a great extent on the accuracy of spatial orientation of the video camera placed on the MRS. However, when video cameras are placed on the MRS, the level of errors of their spatial orientation increases sharply, caused by wind and seismic vibrations, movement of the MRS over rough terrain, etc. In this connection, the paper considers a general solution to the problem of stochastic estimation of spatial orientation parameters of video cameras in conditions of both random mast vibrations and arbitrary character of MRS movement. Since the methods of solving this problem on the basis of satellite measurements at high intensity of natural and artificial radio interference (the methods of formation of which are constantly being improved) are not able to provide the required accuracy of the solution, the proposed approach is based on the use of autonomous means of measurement — inertial and non-inertial. But when using them, the problem of building and stochastic estimation of the general model of video camera motion arises, the complexity of which is determined by arbitrary motion of the video camera, random mast oscillations, measurement disturbances, etc. The problem of stochastic estimation of the general model of video camera motion arises. Due to the unsolved nature of this problem, the paper considers the synthesis of both the video camera motion model in the most general case and the stochastic estimation of its state parameters. The developed algorithm for joint estimation of the spatial orientation parameters of the video camera placed on the mast of the MRS is invariant to the nature of motion of the mast, the video camera, and the MRS itself, providing stability and the required accuracy of estimation under the most general assumptions about the nature of interference of the sensitive elements of the autonomous measuring complex used. The results of the numerical experiment allow us to conclude that the proposed approach can be practically applied to solve the problem of the current spatial orientation of MRS and video cameras placed on them using inexpensive autonomous measuring devices.

The article considers the mathematical aspects of the problem of identifying a multicomponent scattering medium based on pulsed multienergy X-ray irradiation data. X-ray diagnostics problems are of considerable interest from both theoretical and practical points of view, and radiographic methods are indispensable in non-destructive testing of products.

Within the framework of a mathematical model based on a non-stationary integro-differential equation of radiation transfer, the inverse problem of finding the attenuation coefficient for radiation known at the boundary of the region and the problem of identifying a substance based on the found values of the attenuation coefficient on a discrete set of irradiation energies of the medium are formulated.

A preliminary processing of a wide list of substances of interest in computed tomography was carried out to determine the possibility of their identification by an approximately specified radiation attenuation coefficient characterizing the medium. When analyzing the degree of proximity of substances in a certain norm, it was found that the set of all possible substances potentially contained in the medium is divided into a finite number of non-intersecting clusters. For a sufficiently short duration of the probing signal, the scattering component of the radiation leaving the medium is asymptotically small. This circumstance allows us to reduce the inverse problem for the radiation transfer equation to the problem of inverting the Radon transform from the attenuation coefficient. The possibility of unambiguous or partial identification of a substance by varying the duration of the probing pulse and the number of energy levels of irradiation of the medium is analyzed using numerical modeling methods on a specially developed digital phantom.

Amid the ongoing trend of rapid urbanization and the intensive development of megacities and large cities worldwide, the impact of man-made vibrations on residential structures and infrastructure is increasing. The operation of subway systems, construction using pile-driving and drilling equipment, and heavy traffic have become active sources of wave disturbances, which can be a decisive factor in reducing the structural stability of buildings and, consequently, their long-term reliability. This paper proposes a numerical calculation using the grid-characteristic method to model elastic waves propagating through soil layers and load-bearing structures from various sources. By solving the direct problem of numerical pulse simulation and varying its location, the values of velocity vector projections and components of the Cauchy stress tensor were obtained at each time step. Two scenarios were examined: the first simulates the impact of noise generated by construction work or nearby traffic, while the second demonstrates how a subway running through an underground tunnel affects multi-story residential buildings. Wave propagation patterns from these sources were visualized in terms of the parameters of interest, enabling a quick and convenient comprehensive analysis of the problem. The analysis of the obtained data will help adjust the timing and types of repair work, identify structural weak points, and develop innovative methods for preserving historical buildings that are cultural heritage sites. Additionally, it will allow for the most economically optimal construction of modern buildings near architectural landmarks, provide an efficient and safe action plan in emergencies, and modernize existing construction technologies to enhance the comfort of residential buildings, office structures, and other socially significant facilities. It will also aid in selecting the most suitable locations for modern high-precision manufacturing plants.

The paper presents a hybrid artificial neural network model based on an architecture that incorporates a convolutional image encoder (CNN) and an attention module (Attention-based Multiple Instance Learning, Attention MIL). This module aggregates informative features from a sequence of frames capturing the flame spraying process. Additional technological parameters—air pressure, propane pressure, and standoff distance — are integrated into the model via a tabular channel, enabling it to account for the relationship between visual data and numerical process regime characteristics. The software implementation was developed using the Streamlit platform and the PyTorch library. It features an interactive interface for model training and result visualization, analysis of attention weights across frames, and a prediction mode for output characteristics: surface roughness ($R_a$) and the mass of the deposited coating ($m$). Experimental studies were conducted on data from real-world technological processes, and a comparative analysis of the accuracy of various model configurations was performed. The results demonstrate that the hybrid neural network, which combines visual and tabular features, achieves higher prediction accuracy compared to models using only a single modality. Furthermore, when comparing different implementations of the hybrid network, it was established that using the attention mechanism to process the series of flame spray images provides a significant increase in accuracy over a simple averaging of features without attention. The application includes an attention visualization module that creates a montage of the most significant frames and displays their attention weights, allowing users to identify which frames had the greatest influence on the prediction. The model’s capability for export to the ONNX format for integration into process control systems is also demonstrated. The proposed approach showcases the effectiveness of fusing visual and tabular information for manufacturing process monitoring tasks. The model can serve as a foundation for developing a decision support system or an automated quality control system for coatings produced by flame spraying. The limitations of the implemented model and prospects for its further development are also considered.

This paper analyzes some issues in developing numerical methods for solving problems with a Boltzmann-type linear kinetic transport equation. Existing applications of this type of equation are listed. The focus is on the problem of radiative transfer in a flat layer, which are important for experimental research practice. Key definitions and traditional limitations applied to radiative transfer problems are presented. Some features of formulating radiative transfer problems for flat layers of irregular heterogeneous composite materials that are partially transparent to electromagnetic radiation are considered. The main approaches to the numerical and numerical-analytical solution of the linear kinetic transport equation are outlined.

Some variants of the simplest grid numerical methods for solving of nonstationary kinetic problems of transport a flat layer of a medium with strong attenuation are considered. Problems with one- and two-step variants of these iterative methods are analyzed, for some of them the causes of instability and convergence absence in some of them are investigated and established. It is shown that in the explicit conservative one-step method for a layer of a homogeneous absorbing, but neither radiating nor scattering, medium, unstable modes always exist in the spectrum of harmonic solutions. These modes arise in the region of radiation propagating almost parallel to the layer boundaries, and their instability increases with increasing attenuation effects and is caused by the presence of a small coefficient before the spatial derivative in the transport equation. To limit the undesirable influence of this component, various variants of splitting the equation into two and three fractional steps are considered.

It is shown that the most preferable options are those with explicitly organized fractional steps, for which a proof of their stability and convergence, that based on the Lax’s equivalence theorem is presented. It is demonstrated that the correct building of the fractional step sequence in explicit schemes for numerical solving of the nonstationary linear kinetic transport problems can provide additional stabilization, with the scattering integral plays an important role in stabilizing them. So, when solving kinetic transport problems in media with high scattering albedo, the explicit grid method of settling with splitting the iterations into three fractional steps, that were based on physical processes proved to be the simplest and most effective. The method is implemented as Matlab code, which performs quality control during the generation of the numerical solution process. The most significant modeling results are presented, confirming that the three-step method imposes relatively moderate requirements on resources and numerical integration accuracy, and ensures conditional convergence of iterations. Its mathematical correctness is confirmed by the behavior of the equation residuals and direct control of the convergence of numerical solutions. Its physical correctness is confirmed by ensuring, for ergodic systems, the property of convergence to an invariant steady state independent of the initial conditions. Some discovered and possible limitations of the method are listed.

The work will be useful to specialists in the field of mathematical modeling, numerical methods, kinetic theory, combined heat and mass transfer, dealing with issues of interpretation of experimental data, graduate students and senior students specializing in the indicated areas.

A mathematical model of fluid movement in the portal vein is considered. The fundamental circumstance determining the whole variety of portal hemodynamic phenomena is the absence of a valve apparatus. The flow direction is solely a function of the pressure gradient, and, therefore, it is fundamentally reversible when the boundary conditions of the system change.

Calculations were performed in the area representing a CT image fragment of the portal vein of a particular patient, which does not contain vascular bifurcations. The interpolation of patient Dopplerography data published in the press was used as boundary conditions for the flow. The calculations were carried out using the FlowVision industrial hydrodynamics software package. A comparison of calculations using the ideal fluid model and the Kuemada model of viscoplastic flow is carried out.

Calculations were performed for different values of the resistance coefficient corresponding to the physiological norm and with an increased value of the resistance coefficient.

At a normal value of the resistance coefficient, the flow in the portal vein is characterized by strong convective mixing.

As a result of calculations, it was found that when using the Kuemada model, the flow in the portal vein is stratified. The nature of the stratification depends on the hematocrit. At a normal value of the resistance coefficient, a plastic core of the flow is formed as the velocity decreases. With an increased value of the resistance coefficient during flow inversion, the flow core is also formed. When the flow is inverted, the plastic core continues to move in the forward direction, while the wall layers of the liquid begin to move in the opposite direction.

It is noted that in order to obtain correct modeling results, it is necessary to refine the blood composition of the portal vein and, possibly, refine the rheological model. Such information can be obtained both from comparing simulation data with clinical data, and by laboratory examination of portal vein blood.

This work gives results of numerical simulation of a superconducting magnetic focusing system. While modeling this system, special care was taken to achieve approximation accuracy over the condition u(∞)=0 by using Richardson method. The work presents the results of comparison of the magnetic field calculated distribution with measurements of the field performed on a modified magnet SP-40 of “MARUSYA” physical installation. This work also presents some results of numeric analysis of magnetic systems of “MARUSYA” physical installation with the purpose to study an opportunity of designing magnetic systems with predetermined characteristics of the magnetic field.

Numerical calculations of structures and vibrational spectra of small water clusters are performed by solution of the molecular Schrodinger equation in the density functional theory framework using B3LYP and X3LYP hybrid functionals. Spectral features and evolution of hydrogen bond properties in clusters with their size increasing are discussed. The vibrotational Hamiltonian parameters and Fermi and Darling-Dennison anharmonic resonances in small water oligomers are determined. Obtained results may be used in quantum mechanics/molecular dynamics simulations of water and processes in active site of enzyme.

Charge transfer in DNA is simulated by a discrete Holstein model «quantum particle + classical site chain + interaction». Thermostat temperature is taken into account as stochastic force, which acts on classical sites (Langevin equation). Thus dynamics of charge migration along the chain is described by ODE system with stochastic right-hand side. To integrate the system numerically, algorithms of order 1 or 2 are usually applied. We developed «mixed» algorithm having 4th order of accuracy for fast «quantum» variables (note that in quantum subsystem the condition «sum of probabilities of charge being on site is time-constant» must be held), and 2nd order for slow classical variables, which are affecting by stochastic force. The algorithm allows us to calculate trajectories on longer time intervals as compared to standard algorithms. Model calculations of polaron disruption in homogeneous chain caused by temperature fluctuations are given as an example.

The difference scheme for numerical solution of a time-dependant system of two Schrödinger equations with the operator of a spin-orbit interaction for a two-component spinor wave function is offered on the basis of a split method for a time-dependant Schrödinger equations. The computer simulation of the external neutrons’ wave functions evolution with different values of the full moment projection upon internuclear axis and probabilities of their transfer are executed for head-on collisions of ¹⁸O and ⁵⁸Ni nuclei.