All issues

Considered the application of physics-informed neural networks using multi layer perceptrons to solve Cauchy initial value problems in which the right-hand sides of the equation are continuous monotonically increasing, decreasing or oscillating functions. With the use of the computational experiments the influence of the construction of the approximate neural network solution, neural network structure, optimization algorithm and software implementation means on the learning process and the accuracy of the obtained solution is studied. The analysis of the efficiency of the most frequently used machine learning frameworks in software development with the programming languages Python and C# is carried out. It is shown that the use of C# language allows to reduce the time of neural networks training by 20–40%. The choice of different activation functions affects the learning process and the accuracy of the approximate solution. The most effective functions in the considered problems are sigmoid and hyperbolic tangent. The minimum of the loss function is achieved at the certain number of neurons of the hidden layer of a single-layer neural network for a fixed training time of the neural network model. It’s also mentioned that the complication of the network structure increasing the number of neurons does not improve the training results. At the same time, the size of the grid step between the points of the training sample, providing a minimum of the loss function, is almost the same for the considered Cauchy problems. Training single-layer neural networks, the Adam method and its modifications are the most effective to solve the optimization problems. Additionally, the application of twoand three-layer neural networks is considered. It is shown that in these cases it is reasonable to use the LBFGS algorithm, which, in comparison with the Adam method, in some cases requires much shorter training time achieving the same solution accuracy. The specificity of neural network training for Cauchy problems in which the solution is an oscillating function with monotonically decreasing amplitude is also investigated. For these problems, it is necessary to construct a neural network solution with variable weight coefficient rather than with constant one, which improves the solution in the grid cells located near by the end point of the solution interval.

This paper examines the impact of the spatial resolution of a discretized (lattice) representation of the environment on the efficiency and correctness of optimal pathfinding in complex environments. Scenarios are considered that may include bottlenecks, non-uniform obstacle distributions, and areas of increased safety requirements in the immediate vicinity of obstacles. Despite the widespread use of lattice representations of the environment in robotics due to their compatibility with sensor data and support for classical trajectory planning algorithms, the resolution of these lattices has a significant impact on both goal reachability and optimal path performance. An algorithm is proposed that combines environmental connectivity analysis, trajectory optimization, and geometric safety refinement. In the first stage, the Leath algorithm is used to estimate the reachability of the target point by identifying a connected component containing the starting position. Upon confirmation of the target point’s reachability, the A* algorithm is applied to the nodes of this component in the second stage to construct a path that simultaneously minimizes both the path length and the risk of collision. In the third stage, a refined obstacle distance estimate is performed for nodes located in safety zones using a combination of the Gilbert – Johnson –Keerthi (GJK) and expanding polyhedron (EPA) algorithms. Experimental analysis revealed a nonlinear relationship between the probability of the existence and effectiveness of an optimal path and the lattice parameters. Specifically, reducing the spatial resolution of the lattice increases the likelihood of connectivity loss and target unreachability, while increasing its spatial resolution increases computational complexity without a proportional improvement in the optimal path’s performance.

Aortic stenosis and other forms of aortic valve dysfunction are associated with impaired intracardiac hemodynamics, left ventricular overload, and an increased risk of cardiovascular complications. Assessment of valve function requires not only integral clinical indicators but also local mechanical and hemodynamic characteristics, which, as a rule, cannot be measured directly in vivo. Therefore, mathematical modeling is regarded as one of the main tools for the quantitative analysis of the aortic valve. Despite the widespread use of various deformable-solid models and coupled fluid-structure interaction formulations, FSI, for describing leaflet dynamics, the limits of applicability of simplified formulations relative to the fully coupled problem remain insufficiently defined. In this study, an idealized model of the aortic root with the sinuses of Valsalva and a tricuspid valve was considered. The leaflets were described using an anisotropic hyperelastic material model. Five computational scenarios were compared, including a fully coupled FSI formulation that accounts for both solid and fluid dynamics, as well as a deformable-solid model with four loading variants replacing the effect of blood flow, differing in the way pressure was represented and in the direction of load application to the leaflets. The comparison criteria included deformation, displacement, von Mises stress, leaflet oscillatory dynamics, and the geometric opening area of the valve. It was shown that the FSI model provides the most consistent description of valve function, including asymmetric leaflet opening, smoother opening dynamics, and the absence of pronounced nonphysiological flutter. Structural formulations with loads applied along the local normal to the leaflet surface lead to overestimation of deformation and stress, as well as to more pronounced oscillatory regimes. Scenarios with restricted load direction produce a more moderate response, but they also fail to reproduce the spatial load structure and the temporal organization of leaflet opening. It was concluded that, in aortic valve modeling, not only the magnitude of the pressure difference but also the way it is applied to the leaflets in space and time is of decisive importance. Structural deformable-solid models may be used for the qualitative assessment of selected mechanical trends, but they cannot serve as a full substitute for the FSI formulation in the analysis of leaflet kinematics, oscillatory regimes, stress-strain state, and valve opening dynamics.

Problems of application of quasicellular networks for simulation of flows of visitors in different public spaces are considered. Quasicellular networks are basic discrete structures without signature. Proposed approach may be used to create simulations on micro and macro levels. It also may be used for creating geometrical models. There are also multi-flow systems for simulation of sports fans in a sports arena, propagation of fire and poison in public spaces. This approach satisfies the requirements of MOE of Russia № 7-3-113.

This paper formulates and solves a practical problem of data recovery regarding the distribution of languages on regional level in context of China. The necessity of this recovery is related to the problem of the determination of the linguistic diversity indices, which, in turn, are used to analyze empirically and to predict sources of social and economic development as well as to indicate potential conflicts at regional level. We use Ethnologue database and China census as the initial data sources. For every language spoken in China, the data contains (a) an estimate of China residents who claim this language to be their mother tongue, and (b) indicators of the presence of such residents in China provinces. For each pair language/province, we aim to estimate the number of the province inhabitants that claim the language to be their mother tongue. This base problem is reduced to solving an undetermined system of algebraic equations. Given additional restriction that Ethnologue database introduces data collected at different time moments because of gaps in Ethnologue language surveys and accompanying data collection expenses, we relate those data to a single time moment, that turns the initial task to an ’ill-posed’ system of algebraic equations with imprecisely determined right hand side. Therefore, we are looking for an approximate solution characterized by a minimal discrepancy of the system. Since some languages are much less distributed than the others, we minimize the weighted discrepancy, introducing weights that are inverse to the right hand side elements of the equations. This definition of discrepancy allows to recover the required variables. More than 92% of the recovered variables are robust to probabilistic modelling procedure for potential errors in initial data.

The work continues research on the ability of a person to improve the productivity of information processing, using parallel work or improving the performance of analyzers. A person receives a series of tasks, the solution of which requires the processing of a certain amount of information. The time and the validity of the decision are recorded. The dependence of the average solution time on the amount of information in the problem is determined by correctly solved problems. In accordance with the proposed method, the problems contain calculations of expressions in two algebras, one of which is associative and the other is nonassociative. To facilitate the work of the subjects in the experiment were used figurative graphic images of elements of algebra. Non-associative calculations were implemented in the form of the game “rock-paper-scissors”. It was necessary to determine the winning symbol in the long line of these figures, considering that they appear sequentially from left to right and play with the previous winner symbol. Associative calculations were based on the recognition of drawings from a finite set of simple images. It was necessary to determine which figure from this set in the line is not enough, or to state that all the pictures are present. In each problem there was no more than one picture. Computation in associative algebra allows the parallel counting, and in the absence of associativity only sequential computations are possible. Therefore, the analysis of the time for solving a series of problems reveals a consistent uniform, sequential accelerated and parallel computing strategy. In the experiments it was found that all subjects used a uniform sequential strategy to solve non-associative problems. For the associative task, all subjects used parallel computing, and some have used parallel computing acceleration of the growth of complexity of the task. A small part of the subjects with a high complexity, judging by the evolution of the solution time, supplemented the parallel account with a sequential stage of calculations (possibly to control the solution). We develop a special method for assessing the rate of processing of input information by a person. It allowed us to estimate the level of parallelism of the calculation in the associative task. Parallelism of level from two to three was registered. The characteristic speed of information processing in the sequential case (about one and a half characters per second) is twice less than the typical speed of human image recognition. Apparently the difference in processing time actually spent on the calculation process. For an associative problem in the case of a minimum amount of information, the solution time is near to the non-associativity case or less than twice. This is probably due to the fact that for a small number of characters recognition almost exhausts the calculations for the used non-associative problem.

This article solves the problem of constructing a neuro-fuzzy model of fuzzy rules formation and using them for objects state evaluation in conditions of uncertainty. Traditional mathematical statistics or simulation modeling methods do not allow building adequate models of objects in the specified conditions. Therefore, at present, the solution of many problems is based on the use of intelligent modeling technologies applying fuzzy logic methods. The traditional approach of fuzzy systems construction is associated with an expert attraction need to formulate fuzzy rules and specify the membership functions used in them. To eliminate this drawback, the automation of fuzzy rules formation, based on the machine learning methods and algorithms, is relevant. One of the approaches to solve this problem is to build a fuzzy neural network and train it on the data characterizing the object under study. This approach implementation required fuzzy rules type choice, taking into account the processed data specificity. In addition, it required logical inference algorithm development on the rules of the selected type. The algorithm steps determine the number and functionality of layers in the fuzzy neural network structure. The fuzzy neural network training algorithm developed. After network training the formation fuzzyproduction rules system is carried out. Based on developed mathematical tool, a software package has been implemented. On its basis, studies to assess the classifying ability of the fuzzy rules being formed have been conducted using the data analysis example from the UCI Machine Learning Repository. The research results showed that the formed fuzzy rules classifying ability is not inferior in accuracy to other classification methods. In addition, the logic inference algorithm on fuzzy rules allows successful classification in the absence of a part of the initial data. In order to test, to solve the problem of assessing oil industry water lines state fuzzy rules were generated. Based on the 303 water lines initial data, the base of 342 fuzzy rules was formed. Their practical approbation has shown high efficiency in solving the problem.

The paper reviews possibilities to predict buckling of thin cylindrical shells with non-destructive techniques during operation. It studies shallow shells made of high strength materials. Such structures are known for surface displacements exceeding the thickness of the elements. In the explored shells relaxation oscillations of significant amplitude can be generated even under relatively low internal stresses. The problem of the cylindrical shell oscillation is mechanically and mathematically modeled in a simplified form by conversion into an ordinary differential equation. To create the model, the researches of many authors were used who studied the geometry of the surface formed after buckling (postbuckling behavior). The nonlinear ordinary differential equation for the oscillating shell matches the well-known Duffing equation. It is important that there is a small parameter before the second time derivative in the Duffing equation. The latter circumstance enables making a detailed analysis of the obtained equation and describing the physical phenomena — relaxation oscillations — that are unique to thin high-strength shells.

It is shown that harmonic oscillations of the shell around the equilibrium position and stable relaxation oscillations are defined by the bifurcation point of the solutions to the Duffing equation. This is the first point in the Feigenbaum sequence to convert the stable periodic motions into dynamic chaos. The amplitude and the period of relaxation oscillations are calculated based on the physical properties and the level of internal stresses within the shell. Two cases of loading are reviewed: compression along generating elements and external pressure.

It is highlighted that if external forces vary in time according to the harmonic law, the periodic oscillation of the shell (nonlinear resonance) is a combination of slow and stick-slip movements. Since the amplitude and the frequency of the oscillations are known, this fact enables proposing an experimental facility for prediction of the shell buckling with non-destructive techniques. The following requirement is set as a safety factor: maximum load combinations must not cause displacements exceeding specified limits. Based on the results of the experimental measurements a formula is obtained to estimate safety against buckling (safety factor) of the structure.

Numerical modeling of turbulent flows requires finding the balance between accuracy and computational efficiency. For example, DNS and LES models allow to obtain more accurate results, comparing to RANS models, but are more computationally expensive. Because of this, modern applied simulations are mostly performed with RANS models. But even RANS models can be computationally expensive for complex geometries or series simulations due to the necessity of resolving the boundary layer. Some methods, such as wall functions and near-wall domain decomposition, allow to significantly improve the speed of RANS simulations. However, they inevitably lose precision due to using a simplified model in the near-wall domain. To obtain a model that is both accurate and computationally efficient, it is possible to construct a surrogate model based on previously made simulations using the precise model.

In this paper, an operator is constructed that allows reconstruction of the flow field obtained by an accurate model based on the flow field obtained by the simplified model. Spalart–Allmaras model with approximate nearwall domain decomposition and Spalart–Allmaras model resolving the near-wall region are taken as the simplified and the base models respectively. The operator is constructed using a local approach, i. e. to reconstruct a point in the flow field, only features (flow variables and their derivatives) at this point in the field are used. The operator is constructed using the Random Forest algorithm. The efficiency and accuracy of the obtained surrogate model are demonstrated on the supersonic flow over a compression corner with different values for angle $\alpha$ and Reynolds number. The investigation has been conducted into interpolation and extrapolation both by $Re$ and $\alpha$.

The paper is devoted to the secondary use of spectrum in telecommunication networks. It is emphasized that one of the solutions to this problem is the use of cognitive radio technologies and dynamic spectrum access for the successful functioning of which a large amount of information is required, including the parameters of base stations and network subscribers. Storage and processing of information should be carried out using a radio environment map, which is a spatio-temporal database of all activity in the network and allows you to determine the frequencies available for use at a given time. The paper presents a two-level model for forming a map of the radio environment of a cellular communication system LTE, in which the local and global levels are highlighted, which is described by the following parameters: a set of frequencies, signal attenuation, signal propagation map, grid step, current time count. The key objects of the model are the base station and the subscriber unit. The main parameters of the base station include: name, identifier, cell coordinates, range number, radiation power, numbers of connected subscriber devices, dedicated resource blocks. For subscriber devices, the following parameters are used: name, identifier, location, current coordinates of the device cell, base station identifier, frequency range, numbers of resource blocks for communication with the station, radiation power, data transmission status, list of numbers of the nearest stations, schedules movement and communication sessions of devices. An algorithm for the implementation of the model is presented, taking into account the scenarios of movement and communication sessions of subscriber devices. A method for calculating a map of the radio environment at a point on a coordinate grid, taking into account losses during the propagation of radio signals from emitting devices, is presented. The software implementation of the model is performed using the MatLab package. The approaches are described that allow to increase the speed of its work. In the simulation, the choice of parameters was carried out taking into account the data of the existing communication systems and the economy of computing resources. The experimental results of the algorithm for the formation of a radio environment map are demonstrated, confirming the correctness of the developed model.