Результаты поиска по 'structure analysis':
Найдено статей: 122
  1. Shamiev M.O., Trofimov A.G.
    Learning spatio-temporal precursors of dam instability using a CNN–BiGRU framework
    Computer Research and Modeling, 2026, v. 18, no. 2, pp. 377-397

    Dam safety assessment increasingly relies on continuous monitoring of hydrometeorological variables; however, identifying early-stage instability remains challenging due to complex spatio-temporal interactions and highly imbalanced failure observations. This study proposes a deep learning framework based on a Convolutional Bidirectional Gated Recurrent Unit (CNN–BiGRU) architecture to learn spatio-temporal precursors of dam instability from multivariate hydrometeorological time series. The convolutional component extracts localized temporal patterns associated with short-term fluctuations, while the bidirectional recurrent structure captures long-range dependencies and evolving dynamics preceding critical states.

    The proposed model is evaluated on a real-world dam monitoring dataset comprising multiple water-level, meteorological, and derived dynamic indicators. To address class imbalance, a cost-sensitive training strategy using class weighting is adopted without synthetic oversampling. Experimental results demonstrate strong predictive performance, achieving an accuracy of 0.961, precision of 0.901, recall of 0.757, and an F1-score of 0.823. The model further attains a ROC-AUC of 0.907 and a PR-AUC of 0.819, indicating robust discrimination capability under imbalanced conditions.

    Feature importance analysis reveals that short- and medium-term water level variability, including rolling standard deviation, volatility, and multi-scale gradients, play a dominant role in characterizing pre-instability behavior, providing physically interpretable insights into dam response dynamics. The findings suggest that the CNN–BiGRU framework effectively captures meaningful spatio-temporal precursors and offers a reliable data-driven tool for supporting dam safety monitoring and decision-making under real operational conditions.

  2. We propose an approach for the reconstruction and quantitative phenotyping of plant morphological traits at early ontogenetic stages based on digital image analysis. The proposed algorithm combines deep learning and graph-based representations while incorporating biological principles of morphogenesis. This integration enables the transition from binary segmentation to the reconstruction of a topologically consistent plant structure with accurate separation of intersecting root systems in images containing multiple plants. At the first stage, binary masks of seeds, shoots, and root systems are generated using a U-Net convolutional neural network architecture. The resulting image is transformed into a graph model in which edges correspond to root and shoot segments, while vertices represent key morphological points, including branching and intersection nodes. A directed traversal algorithm initialized from the seed point, combined with watershed-based graph partitioning and a composite scoring function for primary axis selection, identifies individual plants as isolated subgraphs and accurately distinguishes the primary root, lateral roots, and shoot. The validity of the algorithm was confirmed through a multi-level validation procedure, including comparison of graph reconstruction results on segmented images and end-to-end evaluation of the complete computational pipeline on original images against existing software solutions and expert manual annotations. The proposed approach is robust to variability in root system morphology and image noise and provides high accuracy in morphological trait extraction. The results of this study can be applied in plant breeding programs.

  3. Nayshtut Yu.S.
    On the boundaries of optimally designed elastoplastic structures
    Computer Research and Modeling, 2017, v. 9, no. 3, pp. 503-515

    This paper studies minimum volume elastoplastic bodies. One part of the boundary of every reviewed body is fixed to the same space points while stresses are set for the remaining part of the boundary surface (loaded surface). The shape of the loaded surface can change in space but the limit load factor calculated based on the assumption that the bodies are filled with elastoplastic medium must not be less than a fixed value. Besides, all varying bodies are supposed to have some type of a limited volume sample manifold inside of them.

    The following problem has been set: what is the maximum number of cavities (or holes in a two-dimensional case) that a minimum volume body (plate) can have under the above limitations? It is established that in order to define a mathematically correct problem, two extra conditions have to be met: the areas of the holes must be bigger than the small constant while the total length of the internal hole contour lines within the optimum figure must be minimum among the varying bodies. Thus, unlike most articles on optimum design of elastoplastic structures where parametric analysis of acceptable solutions is done with the set topology, this paper looks for the topological parameter of the design connectivity.

    The paper covers the case when the load limit factor for the sample manifold is quite large while the areas of acceptable holes in the varying plates are bigger than the small constant. The arguments are brought forward that prove the Maxwell and Michell beam system to be the optimum figure under these conditions. As an example, microphotographs of the standard biological bone tissues are presented. It is demonstrated that internal holes with large areas cannot be a part of the Michell system. At the same the Maxwell beam system can include holes with significant areas. The sufficient conditions are given for the hole formation within the solid plate of optimum volume. The results permit generalization for three-dimensional elastoplastic structures.

    The paper concludes with the setting of mathematical problems arising from the new problem optimally designed elastoplastic systems.

    Views (last year): 8.
  4. Uchmanski J.Z.
    On algorithmic essence of biology
    Computer Research and Modeling, 2020, v. 12, no. 3, pp. 641-652

    Mathematicity of physics is surprising, but it enables us to understand the laws of nature through the analysis of mathematical structures describing it. This concerns, however, only physics. The degree of the mathematization of biology is low, and attempts to mathematize it are limited to the application of mathematical methods used for the description of physical systems. When doing so, we are likely to commit an error of attributing to biological systems features that they do not have. Some argue that biology does need new mathematical methods conforming to its needs, and not known from physics. However, because of a specific complexity of biological systems, we should speak of their algorithmicity, rather than of their mathematicity. As an example of algorithmic approach one can indicate so called individual-based models used in ecology to describe population dynamics or fractal models applied to describe geometrical complexity of such biological structures as trees.

  5. Revutskaya O.L., Neverova G.P., Frisman E.Y.
    A minimal model of density-dependent population dynamics incorporating sex structure: simulation and application
    Computer Research and Modeling, 2025, v. 17, no. 5, pp. 941-961

    This study proposes and analyzes a discrete-time mathematical model of population dynamics with seasonal reproduction, taking into account the density-dependent regulation and sex structure. In the model, population birth rate depends on the number of females, while density is regulated through juvenile survival, which decreases exponentially with increasing total population size. Analytical and numerical investigations of the model demonstrate that when more than half of both females and males survive, the population exhibits stable dynamics even at relatively high birth rates. Oscillations arise when the limitation of female survival exceeds that of male survival. Increasing the intensity of male survival limitation can stabilize population dynamics, an effect particularly evident when the proportion of female offspring is low. Depending on parameter values, the model exhibits stable, periodic, or irregular dynamics, including multistability, where changes in current population size driven by external factors can shift the system between coexisting dynamic modes. To apply the model to real populations, we propose an approach for estimating demographic parameters based on total abundance data. The key idea is to reduce the two-component discrete model with sex structure to a delay equation dependent only on total population size. In this formulation, the initial sex structure is expressed through total abundance and depends on demographic parameters. The resulting one-dimensional equation was applied to describe and estimate demographic characteristics of ungulate populations in the Jewish Autonomous Region. The delay equation provides a good fit to the observed dynamics of ungulate populations, capturing long-term trends in abundance. Point estimates of parameters fall within biologically meaningful ranges and produce population dynamics consistent with field observations. For moose, roe deer, and musk deer, the model suggests predominantly stable dynamics, while annual fluctuations are primarily driven by external factors and represent deviations from equilibrium. Overall, these estimates enable the analysis of structured population dynamics alongside short-term forecasting based on total abundance data.

  6. Giricheva E.E.
    Analysis of taxis-driven instability of a predator–prey system through the plankton community model
    Computer Research and Modeling, 2020, v. 12, no. 1, pp. 185-199

    The paper deals with a prey-predator model, which describes the spatiotemporal dynamics of plankton community and the nutrients. The system is described by reaction-diffusion-advection equations in a onedimensional vertical column of water in the surface layer. Advective term of the predator equation represents the vertical movements of zooplankton with velocity, which is assumed to be proportional to the gradient of phytoplankton density. This study aimed to determine the conditions under which these movements (taxis) lead to the spatially heterogeneous structures generated by the system. Assuming diffusion coefficients of all model components to be equal the instability of the system in the vicinity of stationary homogeneous state with respect to small inhomogeneous perturbations is analyzed.

    Necessary conditions for the flow-induced instability were obtained through linear stability analysis. Depending on the local kinetics parameters, increasing the taxis rate leads to Turing or wave instability. This fact is in good agreement with conditions for the emergence of spatial and spatiotemporal patterns in a minimal phytoplankton–zooplankton model after flow-induced instabilities derived by other authors. This mechanism of generating patchiness is more general than the Turing mechanism, which depends on strong conditions on the diffusion coefficients.

    While the taxis exceeding a certain critical value, the wave number corresponding to the fastest growing mode remains unchanged. This value determines the type of spatial structure. In support of obtained results, the paper presents the spatiotemporal dynamics of the model components demonstrating Turing-type pattern and standing wave pattern.

  7. Stepanyan I.V.
    Biomathematical system of the nucleic acids description
    Computer Research and Modeling, 2020, v. 12, no. 2, pp. 417-434

    The article is devoted to the application of various methods of mathematical analysis, search for patterns and studying the composition of nucleotides in DNA sequences at the genomic level. New methods of mathematical biology that made it possible to detect and visualize the hidden ordering of genetic nucleotide sequences located in the chromosomes of cells of living organisms described. The research was based on the work on algebraic biology of the doctor of physical and mathematical sciences S. V. Petukhov, who first introduced and justified new algebras and hypercomplex numerical systems describing genetic phenomena. This paper describes a new phase in the development of matrix methods in genetics for studying the properties of nucleotide sequences (and their physicochemical parameters), built on the principles of finite geometry. The aim of the study is to demonstrate the capabilities of new algorithms and discuss the discovered properties of genetic DNA and RNA molecules. The study includes three stages: parameterization, scaling, and visualization. Parametrization is the determination of the parameters taken into account, which are based on the structural and physicochemical properties of nucleotides as elementary components of the genome. Scaling plays the role of “focusing” and allows you to explore genetic structures at various scales. Visualization includes the selection of the axes of the coordinate system and the method of visual display. The algorithms presented in this work are put forward as a new toolkit for the development of research software for the analysis of long nucleotide sequences with the ability to display genomes in parametric spaces of various dimensions. One of the significant results of the study is that new criteria were obtained for the classification of the genomes of various living organisms to identify interspecific relationships. The new concept allows visually and numerically assessing the variability of the physicochemical parameters of nucleotide sequences. This concept also allows one to substantiate the relationship between the parameters of DNA and RNA molecules with fractal geometric mosaics, reveals the ordering and symmetry of polynucleotides, as well as their noise immunity. The results obtained justified the introduction of new terms: “genometry” as a methodology of computational strategies and “genometrica” as specific parameters of a particular genome or nucleotide sequence. In connection with the results obtained, biosemiotics and hierarchical levels of organization of living matter are raised.

  8. Okhapkina E.P., Okhapkin V.P.
    Approaches to a social network groups clustering
    Computer Research and Modeling, 2015, v. 7, no. 5, pp. 1127-1139

    The research is devoted to the problem of the use of social networks as a tool of the illegal activity and as a source of information that could be dangerous to society. The article presents the structure of the multiagent system with which a social network groups could be clustered according to the criteria uniquely defines a group as a destructive. The agents’ of the system clustering algorithm is described.

    Views (last year): 8. Citations: 2 (RSCI).
  9. Lopatin N.V., Kydrjavtsev E.A., Panin P.V., Vidumkina S.V.
    Simulation of forming of UFG Ti-6-4 alloy at low temperature of superplasticity
    Computer Research and Modeling, 2017, v. 9, no. 1, pp. 127-133

    Superplastic forming of Ni and Ti based alloys is widely used in aerospace industry. The main advantage of using the effect of superplasticity in sheet metal forming processes is a feasibility of forming materials with a high amount of plastic strain in conditions of prevailing tensile stresses. This article is dedicated to study commercial FEM software SFTC DEFORM application for prediction thickness deviation during low temperature superplastic forming of UFG Ti-6-4 alloy. Experimentally, thickness deviation during superplastic forming can be observed in the local area of plastic deformation and this process is aggravated by local softening of the metal and this is stipulated by microstructure coarsening. The theoretical model was prepared to analyze experimentally observed metal flow. Two approaches have been used for that. The first one is the using of integrated creep rheology model in DEFORM. As superplastic effect is observed only in materials with fine and ultrafine grain sizes the second approach is carried out using own user procedures for rheology model which is based on microstructure evolution equations. These equations have been implemented into DEFORM via Fortran user’s solver subroutines. Using of FEM simulation for this type of forming allows tracking a strain rate in different parts of a workpiece during a process, which is crucial for maintaining the superplastic conditions. Comparison of these approaches allows us to make conclusions about effect of microstructure evolution on metal flow during superplastic deformation. The results of the FEM analysis and theoretical conclusions have been approved by results of the conducted Erichsen test. The main issues of this study are as follows: a) the DEFORM software allows an engineer to predict formation of metal shape under the condition of low-temperature superplasticity; b) in order to augment the accuracy of the prediction of local deformations, the effect of the microstructure state of an alloy having sub-microcristalline structure should be taken into account in the course of calculations in the DEFORM software.

    Views (last year): 10.
  10. Kovalenko I.B., Dreval V.D., Fedorov V.A., Kholina E.G., Gudimchuk N.B.
    Microtubule protofilament bending characterization
    Computer Research and Modeling, 2020, v. 12, no. 2, pp. 435-443

    This work is devoted to the analysis of conformational changes in tubulin dimers and tetramers, in particular, the assessment of the bending of microtubule protofilaments. Three recently exploited approaches for estimating the bend of tubulin protofilaments are reviewed: (1) measurement of the angle between the vector passing through the H7 helices in $\alpha$ and $\beta$ tubulin monomers in the straight structure and the same vector in the curved structure of tubulin; (2) measurement of the angle between the vector, connecting the centers of mass of the subunit and the associated GTP nucleotide, and the vector, connecting the centers of mass of the same nucleotide and the adjacent tubulin subunit; (3) measurement of the three rotation angles of the bent tubulin subunit relative to the straight subunit. Quantitative estimates of the angles calculated at the intra- and inter-dimer interfaces of tubulin in published crystal structures, calculated in accordance with the three metrics, are presented. Intra-dimer angles of tubulin in one structure, measured by the method (3), as well as measurements by this method of the intra-dimer angles in different structures, were more similar, which indicates a lower sensitivity of the method to local changes in tubulin conformation and characterizes the method as more robust. Measuring the angle of curvature between H7-helices (method 1) produces somewhat underestimated values of the curvature per dimer. Method (2), while at first glance generating the bending angle values, consistent the with estimates of curved protofilaments from cryoelectron microscopy, significantly overestimates the angles in the straight structures. For the structures of tubulin tetramers in complex with the stathmin protein, the bending angles calculated with all three metrics varied quite significantly for the first and second dimers (up to 20% or more), which indicates the sensitivity of all metrics to slight variations in the conformation of tubulin dimers within these complexes. A detailed description of the procedures for measuring the bending of tubulin protofilaments, as well as identifying the advantages and disadvantages of various metrics, will increase the reproducibility and clarity of the analysis of tubulin structures in the future, as well as it will hopefully make it easier to compare the results obtained by various scientific groups.

Pages: « first previous next last »

Indexed in Scopus

Full-text version of the journal is also available on the web site of the scientific electronic library eLIBRARY.RU

The journal is included in the Russian Science Citation Index

The journal is included in the RSCI

International Interdisciplinary Conference "Mathematics. Computing. Education"