All issues

The paper considers an earlier proposed by the author discrete modification of the A. P. Mikhailov “power – society” model. The modification is based on a stochastic cellular automaton, it’s microdynamics being completely different from the c continuous model based on differential equations. However, the macrodynamics of the discrete modification is shown in previous works to be equivalent to one of the continuous model. This is important, but at the same time raises the question why use the discrete model. The answer lies in its flexibility, which allows adding a variety of factors, the consideration of which in a continuous model either leads to a significant increase in computational complexity or is simply impossible.

This paper considers several examples of such applicability expansion of the model, with the help of which a number of applied problems are solved.

One of the modifications of the model takes into account economic ties between regions and municipalities, which could not be studied in the basic model. Computational experiments confirmed the improvement of the socio-economic indicators of the system under the influence of the ties.

The second modification allows internal migration in the system. Using it we studied the socio-economic development of a more prosperous region that attracts migrants.

Next we studied the dynamics of the system while the number of regions and municipalities changes. The negative impact of this process on the socio-economic indicators of the system was shown and possible control was found to overcome this negative impact.

The results of this study, therefore, include both the solution of some applied problems and the demonstration of the broader applicability of the discrete model compared with the continuous one.

Eco-epidemiological models provide insights into factors influencing disease transmission and host population stability. This study developed two eco-epidemiological models to investigate the impacts of prey refuge availability and an Allee effect on dynamics. Model A incorporated these mechanisms, while model B did not. Both models featured predator – prey and disease transmission and were analyzed mathematically and via simulation. Model equilibrium states were examined locally and globally under differing parameter combinations representative of environmental scenarios. Model A and B demonstrated globally stable conditions within certain parameter ranges, signalling refuge and Allee effect terms promote robustness. Moreover, model A showed a higher potential toward extinction of the species as a result of incorporating the Allee effect. Bifurcation analyses revealed qualitative shifts in behavior triggered by modifications like altered predation mortality. Model A manifested a transcritical bifurcation indicating critical population thresholds. Additional bifurcation types were noticed when refuge and Allee stabilizing impacts were absent in model B. Findings showed disease crowding effect and that host persistence is positively associated with refuge habitat, reducing predator – prey encounters. The Allee effect also calibrated stability via heightened sensitivity to small groups. Simulations aligned with mathematical predictions. Model A underwent bifurcations at critical predator death rates impacting prey outcomes. This work provides a valuable framework to minimize transmission given resource availability or demographic alterations, generating testable hypotheses.

For the three-axis stabilization of the spacecraft in the orbital coordinate system, including in the indirect equilibrium position, an electrodynamic control method is used based on the simultaneous use of two control torques that affect the dynamics of the spacecraft’s rotational motion in the Earth’s magnetic field (EMF), namely, the Lorentz torque and the torque of magnetic interaction. It is assumed that the spacecraft, equipped with an electric charge with a controlled vector of static moment of charge of the first order and a controlled intrinsic magnetic moment, moves in a Keplerian circular Earth orbit of arbitrary inclination. It was previously shown that combining two control systems, magnetic and Lorentz control, into a single electrodynamic control system (EDCS) makes it possible to successfully solve various problems of controlling the angular motion of spacecraft. Unlike many well-known studies performed for one or another approximate EMF model, this work does not impose restrictions on the accuracy of the EMF approximation. Previous studies have shown the limited capabilities of the EDCS for spacecraft moving in orbits close to the polar ones, due to the presence in this case of such points on the spacecraft trajectory in which it is possible for the lines of action of the geomagnetic induction vector and the spacecraft velocity vector relative to the EMF. Therefore, in this paper, the problem of overcoming these difficulties is posed and solved. A modification of the EDCS is proposed, based, firstly, on optimizing the control of the angular motion of the spacecraft and, secondly, on limiting the maximum value of the modulus of the vector of the center of charge relative to the center of mass of the spacecraft, which must be created during control. A method for selecting parameters for a modified EMF is recommended. The presented results of numerical experiments for spacecraft located in polar and circumpolar orbits not only demonstrate the operability of the proposed modification of the EDCS, but also indicate the possibility of technical implementation of the modified electrodynamic method of three-axis spacecraft stabilization.

Dam safety assessment increasingly relies on continuous monitoring of hydrometeorological variables; however, identifying early-stage instability remains challenging due to complex spatio-temporal interactions and highly imbalanced failure observations. This study proposes a deep learning framework based on a Convolutional Bidirectional Gated Recurrent Unit (CNN–BiGRU) architecture to learn spatio-temporal precursors of dam instability from multivariate hydrometeorological time series. The convolutional component extracts localized temporal patterns associated with short-term fluctuations, while the bidirectional recurrent structure captures long-range dependencies and evolving dynamics preceding critical states.

The proposed model is evaluated on a real-world dam monitoring dataset comprising multiple water-level, meteorological, and derived dynamic indicators. To address class imbalance, a cost-sensitive training strategy using class weighting is adopted without synthetic oversampling. Experimental results demonstrate strong predictive performance, achieving an accuracy of 0.961, precision of 0.901, recall of 0.757, and an F1-score of 0.823. The model further attains a ROC-AUC of 0.907 and a PR-AUC of 0.819, indicating robust discrimination capability under imbalanced conditions.

Feature importance analysis reveals that short- and medium-term water level variability, including rolling standard deviation, volatility, and multi-scale gradients, play a dominant role in characterizing pre-instability behavior, providing physically interpretable insights into dam response dynamics. The findings suggest that the CNN–BiGRU framework effectively captures meaningful spatio-temporal precursors and offers a reliable data-driven tool for supporting dam safety monitoring and decision-making under real operational conditions.

Flexible software for modeling polymeric film production by use of blown extrusion has been developed. It consists of library of mathematical models for extrusion and forming blown film, sub-system for changeover to new type of film and sub-system for investigation of extrusion and forming for film quality control under film production. The sub-system for changeover allows to choose the equipment of extrusion line on technical and economic indices, to synthesize 3D model of the line and to generate regulation ranges of regime parameters for given type of film. The sub-system for investigation allows to calculate temperature profiles of heating and cooling material, geometrical and optical characteristics of film depending on regime parameters for stages of extrusion and forming and to evaluate regime parameters ensuring given quality of polymeric film.

The most important principle of military science and border security is the principle of concentrating the main efforts on the main directions and tasks. At the tactical level, there are many mathematical models for computing the optimal resource allocation by directions and objects, whereas at the state level there are no corresponding models. Using the statistical data on the results of the protection of the US border, an exponential type border production function parameter is calculated that reflects the organizational and technological capabilities of the border guard. The production function determines the dependence of the probability of detaining offenders from the density of border guards per kilometer of the border. Financial indicators in the production function are not taken into account, as the border maintenance budget and border equipment correlate with the number of border agents. The objective function of the border guards is defined — the total prevented damage from detained violators taking into account their expected danger for the state and society, which is to be maximized. Using Slater's condition, the solution of the problem was found — optimal density of border guard was calculated for the regions of the state. Having a model of resource allocation, the example of the three border regions of the United States has also solved the reverse problem — threats in the regions have been assessed based on the known allocation of resources. The expected danger from an individual offender on the US-Canada border is 2–5 times higher than from an offender on the US-Mexican border. The results of the calculations are consistent with the views of US security experts: illegal migrants are mostly detained on the US-Mexican border, while potential terrorists prefer to use other channels of penetration into the US (including the US-Canadian border), where the risks of being detained are minimal. Also, the results of the calculations are consistent with the established practice of border protection: in 2013 the number of border guards outside the checkpoints on the US-Mexican border increased by 2 times compared with 2001, while on the American-Canadian border — 4 times. The practice of border protection and the views of specialists give grounds for approval of the verification of the model.

The traditional approach to computing optimal game strategies of firms on oligopolistic markets and of indicators of such markets consists in studying linear dynamical games with quadratic criteria and solving generalized matrix Riccati equations.

The other approach proposed by the author is based on methods of operational calculus (in particular, Z-transform). This approach makes it possible to achieve economic meaningful decisions under wider field of parameter values. It characterizes by simplicity of computations and by necessary for economic analysis visibility. One of its advantages is that in many cases important for economic practice, it, in contrast to the traditional approach, provides the ability to make calculations using widespread spreadsheets, which allows to study the prospects for the development of oligopolistic markets to a wide range of professionals and consumers.

The article deals with the practical aspects of determining the optimal Nash–Cournot strategies of participants in oligopolistic markets on the basis of operational calculus, in particular the technique of computing the optimal Nash–Cournot strategies in Excel. As an illustration of the opportinities of the proposed methods of calculation, examples close to the practical problems of forecasting indicators of the markets of high-tech products are studied.

The results of calculations obtained by the author for numerous examples and real economic systems, both using the obtained relations on the basis of spreadsheets and using extended Riccati equations, are very close. In most of the considered practical problems, the deviation of the indicators calculated in accordance with the two approaches, as a rule, does not exceed 1.5–2%. The highest value of relative deviations (up to 3–5%) is observed at the beginning of the forecasting period. In typical cases, the period of relatively noticeable deviations is 3–5 moments of time. After the transition period, there is almost complete agreement of the values of the required indicators using both approaches.

Mathematicity of physics is surprising, but it enables us to understand the laws of nature through the analysis of mathematical structures describing it. This concerns, however, only physics. The degree of the mathematization of biology is low, and attempts to mathematize it are limited to the application of mathematical methods used for the description of physical systems. When doing so, we are likely to commit an error of attributing to biological systems features that they do not have. Some argue that biology does need new mathematical methods conforming to its needs, and not known from physics. However, because of a specific complexity of biological systems, we should speak of their algorithmicity, rather than of their mathematicity. As an example of algorithmic approach one can indicate so called individual-based models used in ecology to describe population dynamics or fractal models applied to describe geometrical complexity of such biological structures as trees.

The article deals with the development of a methodological approach to forecasting and modeling the socioeconomic consequences of viral epidemics in conditions of heterogeneous economic development of territorial systems. The relevance of the research stems from the need for rapid mechanisms of public management and stabilization of adverse epidemiological situation, taking into account the spatial heterogeneity of the spread of COVID-19, accompanied by a concentration of infection in large metropolitan areas and territories with high economic activity. The aim of the work is to substantiate a methodology to assess the spatial heterogeneity of the spread of coronavirus infection, find poles of its growth, emerging spatial clusters and zones of their influence with the assessment of inter-territorial relationships, as well as simulate the effects of worsening epidemiological situation on the dynamics of economic development of regional systems. The peculiarity of the developed approach is the spatial clustering of regional systems by the level of COVID-19 incidence, conducted using global and local spatial autocorrelation indices, various spatial weight matrices, and L.Anselin mutual influence matrix based on the statistical information of the Russian Federal State Statistics Service. The study revealed a spatial cluster characterized by high levels of infection with COVID-19 with a strong zone of influence and stable interregional relationships with surrounding regions, as well as formed growth poles which are potential poles of further spread of coronavirus infection. Regression analysis using panel data not only confirmed the impact of COVID-19 incidence on the average number of employees in enterprises, the level of average monthly nominal wages, but also allowed to form a model for scenario prediction of the consequences of the spread of coronavirus infection. The results of this study can be used to form mechanisms to contain the coronavirus infection and stabilize socio-economic at macroeconomic and regional level and restore the economy of territorial systems, depending on the depth of the spread of infection and the level of economic damage caused.

Nowadays the situation of supply-demand imbalances in the professionals’ labor markets causes human capital losses as far as hampers scientific and innovation development. In Russia, supply-demand imbalances in the engineering labor market are associated with deindustrialization processes and manufacturing decline, resulted in a negative public perception of the engineering profession and high rates of graduates not working within the specialty or changing their occupation.

For analysis of the supply-demand imbalances in the engineering labor market, we elaborated a macroeconomic model. The model consists of 14 blocks, including blocks for demand and supply for engineers and technicians, along with the blocks for macroeconomic indicators as industry and service sector output, capital investment. Using this model, we forecasted the perspective supply-demand imbalances in the engineering labor market in a short-term period and examined the parameters of getting supply-demand balance in the medium-term perspective.

The results obtained show that situation of more balanced supply and demand for engineering labor is possible if there is simultaneous increase in the share of investments in fixed assets of manufacturing and relative wages in industry, besides getting to balance is facilitated by a decrease of the share of graduates not working by specialty. It is worth noting that a decrease in the share of graduates not working by specialty may be affected whether by the growth of relative wages in industry and number of vacancies or by the implementation of measures aimed at improving the working conditions of the engineering workforce and increasing the attractiveness of the profession. To summarize, in the case of the simplest scenario, not considering additional measures of working conditions improvement and increasing the attractiveness of the profession, the conditions of supply-demand balance achievement implies slightly lower growth rates of investment in industry than required in scenarios that involve increasing the share of engineers and technicians working in their specialty after graduation. The latter case, where a gradual decrease in the proportion of those who do not work in engineering specialty is expected, requires, probably, higher investment costs for attracting specialists and creating new jobs, as well as additional measures to strengthen the attractiveness of the engineering profession.