All issues

The study of the development of π-periodic perturbations of a converging spherical shock wave leading to cumulation limitation is performed. The study is based on 3D hydrodynamic calculations with the Carnahan – Starling equation of state for hard sphere fluid. The method of solving the Euler equations on moving (compressing) grids allows one to trace the evolution of the converging shock wave front with high accuracy in a wide range of its radius. The compression rate of the computational grid is adapted to the motion of the shock wave front, while the motion of the boundaries of the computational domain satisfy the condition of its supersonic velocity relative to the medium. This leads to the fact that the solution is determined only by the initial data at the grid compression stage. The second order TVD scheme is used to reconstruct the vector of conservative variables at the boundaries of the computational cells in combination with the Rusanov scheme for calculating the numerical vector of flows. The choice is due to a strong tendency for the manifestation of carbuncle-type numerical instability in the calculations, which is known for other classes of flows. In the three-dimensional case of the observed force, the carbuncle effect was obtained for the first time, which is explained by the specific nature of the flow: the concavity of the shock wave front in the direction of motion, the unlimited (in the symmetric case) growth of the Mach number, and the stationarity of the front on the computational grid. The applied numerical method made it possible to study the detailed flow pattern on the scale of cumulation termination, which is impossible within the framework of the Whitham method of geometric shock wave dynamics, which was previously used to calculate converging shock waves. The study showed that the limitation of cumulation is associated with the transition from the Mach interaction of converging shock wave segments to a regular one due to the progressive increase in the ratio of the azimuthal velocity at the shock wave front to the radial velocity with a decrease in its radius. It was found that this ratio is represented as a product of a limited oscillating function of the radius and a power function of the radius with an exponent depending on the initial packing density in the hard sphere model. It is shown that increasing the packing density parameter in the hard sphere model leads to a significant increase in the pressures achieved in a shock wave with broken symmetry. For the first time in the calculation, it is shown that at the scale of cumulation termination, the flow is accompanied by the formation of high-energy vortices, which involve the substance that has undergone the greatest shock-wave compression. Influencing heat and mass transfer in the region of greatest compression, this circumstance is important for current practical applications of converging shock waves for the purpose of initiating reactions (detonation, phase transitions, controlled thermonuclear fusion).

In this paper, we consider the interaction of a kink of the $\varphi^4$ equation with two identical extended impurities. An extended impurity is described using a rectangular function. The case of an attractive impurity is analyzed. Using analytical methods, we consider the case of small amplitudes of localized waves, when it is possible to linearize the equations of motion. For the numerical solution, the method of lines for partial differential equations was used. To find the oscillation frequencies of waves localized on impurities, the discrete Fourier transform is used. The kink was launched in the direction of the impurities with different initial velocities. The distance between the two impurities was also varied. It is shown that when a kink interacts with impurities, long-lived localized breather-type waves are excited on them. Their structure and coupled dynamics are investigated. It is determined how, by changing the parameters of the impurities and the distance between them, it is possible to control the type and dynamic parameters of the coupled oscillations of the waves localized on the impurities. Possible solutions in the form of in-phase, antiphase oscillations, in the form of beats are found. The oscillations of localized waves occur with the emission of small-amplitude waves. The spectrum of these emissions consists of two frequencies. The first is approximately equal to $\sqrt{2}$, which corresponds to the frequency value for the wobbling breather tail of the $\varphi^4$ equation. The second is approximately equal to the doubled frequency of impurity mode oscillations. The presence of two possible frequencies for coupled localized oscillations is found both analytically and numerically. It is shown that the frequencies strongly depend on the distance between impurities. With increasing distance between impurities, the frequencies merge into one — frequency obtained for the case of a single impurity. The dependences of the frequencies on the distance between impurities found numerically and analytically coincide well for large distances, when the interaction between impurities is weak, and begin to differ noticeably at small distances, when the interaction between impurities is strong. The analytical value of the obtained frequencies is always greater than the numerical ones. It is shown that the dependence of the amplitude of localized waves on the initial kink velocity has several minima and maxima.

The mathematical model for aeroelastic oscillations of a narrow channel wall with a nonlinear-elastic suspension and interacting with a pulsating viscous gas layer is proposed. Within the framework of this model, the aeroelastic response of the channel wall and its phase response were determined and investigated. The authors simultaneously studied the influence of the nonlinear stiffness elastic suspension of the wall, compressibility and dissipative properties of gas, as well as the inertia of its motion on the wall oscillations. The model was elaborated based on the formulation and solution of the initial boundary-value plane problem of mathematical physics. The problem governing equations include the equations of dynamics for barotropic viscous gas, equation of dynamics for the rigid wall as the spring-mass nonlinear oscillator. Using the perturbation method, the asymptotic analysis of the problem was carried out. The solution of the equations of dynamics for the thin layer of viscous gas was obtained by the iteration method. As a result, the law of gas pressure distribution in the channel was determined and the initial problem of aeroelasticity was reduced to the study of the generalized Duffing equation. Its solution was realized by the harmonic balance method, which allowed us to determine the aeroelastic and phase responses of the channel wall in the form of implicit functions. The numerical study of these responses was carried out to evaluate the influence for inertia of gas motion and its compressibility, as well as a comparison of the results obtained with the special cases of creeping motion of viscous gas and incompressible viscous fluid. The results of this study have shown the importance of simultaneous consideration of compressibility and inertia of viscous gas motion when modeling aeroelastic oscillations of the considered channel wall.

This study develops a previously proposed Method of Computer Analogy (MCA) based on formalization of digital computer operations. The paper discusses the position of the proposed approach among other well-known methods. It is emphasized that the primary objective is to derive analytical solutions, although in some cases they have to resort to semianalytical approximations. The paper focuses on constructing solutions for systems which, for certain parameter values, demonstrate the deterministic chaos behavior, namely Lorenz, Marioka – Shimitsu and R¨ossler systems. The paper also considers obtaining solution for Van der Pol equation (reduced to a nonlinear system). The aim of the study is to construct semi-analytical solutions represented as a segment of a power series in a step size of approximating difference scheme. To prevent overflow, authors formalize rank transfer operation. The authors apply a convergent difference scheme, referred to as the “guiding” scheme, to advance to the next step of the independent variable. The resulting approximation by a sum with only a few terms provides an approximation to the solution with any accuracy in accordance with the accuracy of the governing difference scheme. The senior digits in the resulting approximation exhibit probabilistic properties that can be modeled by known distributions, thereby enabling the derivation of analytical and semi-analytical approximations. The paper presents linear approximations that are the base for a complete approximations of solutions and provide important qualitative as well as some quantitative properties of solutions of considered systems. This work describes approximations of various orders, including those that do not guarantee convergence to the exact solution, but simplify the analysis of certain properties of nonlinear equations and systems. In particular, for the Van der Pol equation, authors demonstrate that its corresponding system has a cyclic solution and provide an estimate of its scale. A modification of the MCA that has features of the Monte Carlo method makes it possible to remove recurrent sequences and construct complete solutions in simple situations. The authors mention a promising approach for representing the solution using branched continued fractions.

Monte Carlo (MC) reinforcement learning suffers from high sample complexity, especially in environments with sparse rewards, large state spaces, and strongly correlated trajectories that reduce the statistical efficiency of return estimation. These well-known limitations often lead to slow convergence and unstable learning dynamics, particularly in settings where only a small fraction of collected trajectories is actually informative for policy improvement. A key challenge is therefore to identify a compact yet diverse subset of episodes that contributes most to the accuracy of value estimates while preserving sufficient exploration of the environment. To address this challenge, we reformulate episode selection as a Quadratic Unconstrained Binary Optimization (QUBO) problem and solve it using quantum-inspired sampling techniques. Our method, MC+ QUBO, inserts a combinatorial filtering step into the standard MC policy-evaluation pipeline: given a batch of trajectories, it selects a subset that maximizes cumulative reward and encourages broad state-space coverage. This selection procedure is expressed as a QUBO model, where linear terms favor high-return episodes, quadratic terms penalize redundancy between trajectories, and additional coupling terms can be used to enforce coverage-related constraints or promote structural diversity. Within this framework, we investigate two black-box QUBO solvers: Simulated Quantum Annealing (SQA), which emulates tunneling-based exploration of the search landscape, and Simulated Bifurcation (SB), a dynamical-systems-based iterative optimization method. Both solvers demonstrate the ability to efficiently navigate the combinatorial structure of the trajectory-selection problem and to handle batch sizes that are otherwise computationally expensive for exhaustive or deterministic search. Experiments in a finite-horizon GridWorld environment show that MC+QUBO consistently outperforms vanilla MC in convergence speed, stability of return estimates, and final policy quality. These results highlight the promise of quantum-inspired optimization as a practical decision-making subroutine within reinforcement-learning algorithms, offering a scalable way to improve sample efficiency without modifying the underlying learning paradigm.

This paper describes a method for generating a synthetic database of stenoses, consisting of 1620 entries. Each entry represents the results of a numerical experiment simulating the three-dimensional flow of a viscous incompressible fluid through a tube with a variable cross-section: pressure drop, mean flow rate, cross-sectionally averaged inlet blood flow velocity, maximum stenosis severity, stenosis length, stenosis asymmetry, tube radius, and Reynolds number. The database was validated by comparison with other models (with elastic walls) and bench experiments, showing a deviation in pressure drops of no more than 4%. The synthetic stenosis database was used to train a physics-informed neural network for the rapid estimation of pressure drop based on four key input parameters: Reynolds number, stenosis length, stenosis severity, and stenosis asymmetry coefficient. The physics-informed aspect was achieved by introducing penalties into the loss function for the absence of a positive pressure drop and for the lack of monotonicity of the pressure drop with respect to the input parameters. The physics-informed neural network demonstrated higher accuracy on hemodynamically significant stenoses when tested on a validation set and on new stenoses not represented in the database. The mean relative error for stenoses with a length of 8 healthy vessel radii was 6% for the physics-informed network and 13% for a classical neural network. The errors for short stenoses with a length of 4 radii were nearly identical: 9.5% for the physics-informed network and 10% for the classical neural network. The developed method for the functional assessment of the hemodynamic significance of stenoses can be used both as a standalone tool for clinical stenosis evaluation and as a component of network blood flow models. The approach becomes most relevant when modeling multi-vessel disease, which is predominant in clinical practice. The key advantage of the method lies in the physical correctness of the results and accuracy comparable to classical modeling, but with significantly lower computational costs.

Solving the problem of stationary stream distribution for an arbitrary volume-free hydrosystem with a free level can be reduced to determining the extremes of a multi-variable function. Rayleigh function expressed in terms of the hydraulic characteristics of the parts of the system in question is used as such a function. The same function is Lyapunov function when analyzing the stability of the determined stationary operational modes of a hydrosystem using the direct Lyapunov method.

The aim of research is to develop software system for solving gas dynamic problem in multiply connected integration domains of regular shape by high-performance computing system. Comparison of the various technologies of parallel computing has been done. The program complex is implemented using multithreaded parallel systems to organize both multi-core and massively parallel calculation. The comparison of numerical results with known model problems solutions has been done. Research of performance of different computing platforms has been done.

We consider the two-dimensional mathematical model of wildfire. Numerical solution algorithm based on the method of large particles was developed for this model.

In this paper the problem of searching for the design of the magnetic system for creation a magnetic field with the required characteristics in the given area is solved. On the basis of analysis of the mathematical model of the magnetic system rather a general approach is proposed to the solving of the inverse problem, which is written by the Fredgolm equation H(z) = ∫_SIJ(s)G(z, s)ds, z ∈ S _H, s ∈ S _I . It was necessary to define the current density distribution function J(s) and the existing winding geometry for creation of a required magnetic field H(z). In the paper a method of solving those by means of regularized iterative processes is proposed. On the base of the concrete magnetic system we perform the numerical study of influence of different factors on the character of the magnetic field being designed.