All issues

In this paper we describe an algorithm of numerical solving of an inverse problem on a hyperbolic heat equation with additional second time derivative with a small parameter. The problem in this case is finding an initial distribution with given final distribution. This algorithm allows finding a solution to the problem for any admissible given precision. Algorithm allows evading difficulties analogous to the case of heat equation with inverted time. Furthermore, it allows finding an optimal grid size by learning on a relatively big grid size and small amount of iterations of a gradient method and later extrapolates to the required grid size using Richardson’s method. This algorithm allows finding an adequate estimate of Lipschitz constant for the gradient of the target functional. Finally, this algorithm may easily be applied to the problems with similar structure, for example in solving equations for plasma, social processes and various biological problems. The theoretical novelty of the paper consists in the developing of an optimal procedure of finding of the required grid size using Richardson extrapolations for optimization problems with inexact gradient in ill-posed problems.

The reentry vehicle of the transportation spacecraft that is being created by RSC Energia in regular mode makes soft landing on land surface using a parachute system and thruster devices. But in not standard situations the reentry vehicle also is capable of executing a splashdown. In that case, it becomes important to define the hydrodynamics impact on the reentry vehicle at the moment of the first contact with the surface of water and during submersion into water medium, and to study the dynamics of the vehicle behavior at more recent moments of time.

This article presents results of numerical studies of hydrodynamics forces on the conical vehicle during splashdown, done with the FlowVision software. The paper reviews the cases of the splashdown with inactive solid rocket motors on calm sea and the cases with interactions between rocket jets and the water surface. It presents data on the allocation of pressure on the vehicle in the process of the vehicle immersion into water medium and dynamics of the vehicle behavior after splashdown. The paper also shows flow structures in the area of the reentry vehicle at the different moments of time, and integral forces and moments acting on the vehicle.

For simulation process with moving interphases in the FlowVision software realized the model VOF (volume of fluid). Transfer of the phase boundary is described by the equation of volume fraction of this continuous phase in a computational cell. Transfer contact surface is described by the convection equation, and at the surface tension is taken into account by the Laplace pressure. Key features of the method is the splitting surface cells where data is entered the corresponding phase. Equations for both phases (like the equations of continuity, momentum, energy and others) in the surface cells are accounted jointly.

Efficiency of production directly depends on quality of the management of technology which, in turn, relies on the accuracy and efficiency of the processing of control and measuring information. Development of the mathematical methods of research of the system communications and regularities of functioning and creation of the mathematical models taking into account structural features of object of researches, and also writing of the software products for realization of these methods are an actual task. Practice has shown that the list of parameters that take place in the study of complex object of modern production, ranging from a few dozen to several hundred names, and the degree of influence of each factor in the initial time is not clear. Before working for the direct determination of the model in these circumstances, it is impossible — the amount of the required information may be too great, and most of the work on the collection of this information will be done in vain due to the fact that the degree of influence on the optimization of most factors of the original list would be negligible. Therefore, a necessary step in determining a model of a complex object is to work to reduce the dimension of the factor space. Most industrial plants are hierarchical group processes and mass volume production, characterized by hundreds of factors. (For an example of realization of the mathematical methods and the approbation of the constructed models data of the Moldavian steel works were taken in a basis.) To investigate the systemic linkages and patterns of functioning of such complex objects are usually chosen several informative parameters, and carried out their sampling. In this article the sequence of coercion of the initial indices of the technological process of the smelting of steel to the look suitable for creation of a mathematical model for the purpose of prediction is described. The implementations of new types became also creation of a basis for development of the system of automated management of quality of the production. In the course of weak correlation the following stages are selected: collection and the analysis of the basic data, creation of the table the correlated of the parameters, abbreviation of factor space by means of the correlative pleiads and a method of weight factors. The received results allow to optimize process of creation of the model of multiple-factor process.

In this paper we discuss lower bounds for convergence of convex optimization methods of high order and attainability of this bounds. We formulate a hypothesis that covers all the cases. It is noticeable that we provide this statement without a proof. Newton method is the most famous method that uses gradient and Hessian of optimized function. However, it converges locally even for strongly convex functions. Global convergence can be achieved with cubic regularization of Newton method [Nesterov, Polyak, 2006], whose iteration cost is comparable with iteration cost of Newton method and is equivalent to inversion of Hessian of optimized function. Yu.Nesterov proposed accelerated variant of Newton method with cubic regularization in 2008 [Nesterov, 2008]. R.Monteiro and B. Svaiter managed to improve global convergence of cubic regularized method in 2013 [Monteiro, Svaiter, 2013]. Y.Arjevani, O. Shamir and R. Shiff showed that convergence bound of Monteiro and Svaiter is optimal (cannot be improved by more than logarithmic factor with any second order method) in 2017 [Arjevani et al., 2017]. They also managed to find bounds for convex optimization methods of p-th order for $p ≥ 2$. However, they got bounds only for first and second order methods for strongly convex functions. In 2018 Yu.Nesterov proposed third order convex optimization methods with rate of convergence that is close to this lower bounds and with similar to Newton method cost of iteration [Nesterov, 2018]. Consequently, it was showed that high order methods can be practical. In this paper we formulate lower bounds for p-th order methods for $p ≥ 3$ for strongly convex unconstrained optimization problems. This paper can be viewed as a little survey of state of the art of high order optimization methods.

Mathematical models of many natural processes are described by partial differential equations with singular solutions. Classical numerical methods for determination of approximate solution to such problems are inefficient. In the present paper a boundary value problem for vector wave equation in L-shaped domain is considered. The presence of reentrant corner of size $3\pi/2$ on the boundary of computational domain leads to the strong singularity of the solution, i.e. it does not belong to the Sobolev space $H^1$ so classical and special numerical methods have a convergence rate less than $O(h)$. Therefore in the present paper a special weighted set of vector-functions is introduced. In this set the solution of considered boundary value problem is defined as $R_ν$-generalized one.

For numerical determination of the $R_ν$-generalized solution a weighted vector finite element method is constructed. The basic difference of this method is that the basis functions contain as a factor a special weight function in a degree depending on the properties of the solution of initial problem. This allows to significantly raise a convergence speed of approximate solution to the exact one when the mesh is refined. Moreover, introduced basis functions are solenoidal, therefore the solenoidal condition for the solution is taken into account precisely, so the spurious numerical solutions are prevented.

Results of numerical experiments are presented for series of different type model problems: some of them have a solution containing only singular component and some of them have a solution containing a singular and regular components. Results of numerical experiment showed that when a finite element mesh is refined a convergence rate of the constructed weighted vector finite element method is $O(h)$, that is more than one and a half times better in comparison with special methods developed for described problem, namely singular complement method and regularization method. Another features of constructed method are algorithmic simplicity and naturalness of the solution determination that is beneficial for numerical computations.

In various applications, i. e., astronomical imaging, electron microscopy, and tomography, images are often damaged by Poisson noise. At the same time, the thermal motion leads to Gaussian noise. Therefore, in such applications, the image is usually corrupted by mixed Poisson – Gaussian noise.

In this paper, we propose a novel method for recovering images corrupted by mixed Poisson – Gaussian noise. In the proposed method, we develop a total variation-based model connected with the nonconvex function and the total generalized variation regularization, which overcomes the staircase artifacts and maintains neat edges.

Numerically, we employ the primal-dual method combined with the classical iteratively reweighted $l_1$ algorithm to solve our minimization problem. Experimental results are provided to demonstrate the superiority of our proposed model and algorithm for mixed Poisson – Gaussian removal to state-of-the-art numerical methods.

This study investigates the influence of a time-periodic (modulation) magnetic field upon the development of ferroconvection in a densely packed medium saturated with couple stress ferromagnetic fluid. The Darcy model is used to describe the flow in porous medium. The research is important from practical and theoretical point of view. A time-periodic magnetic field is essential in circumscribing channels where the effect of gravity is less or nonexistent to generate circulation. There are numerous engineering uses for this in the manufacturing of magnetic field sensors, charged particle electrode materials, modulators, magnetic resonators, and optical devices. The resulting physical eigenvalue problem is dealt with by using isothermal boundary conditions and the regular perturbation technique with a small time-periodic amplitude. The onset criteria were defined on the supposition that the exchange of stability principle holds. The shift in the thermal Rayleigh number is dependent on the associated parameters: magnetic parameter, Vadasz number, couple stress parameter, porosity, and frequency of the time-periodic function. The results in this case indicate that the onset of ferroconvection can be enhanced or reduced by appropriate changes in the governing parameters.

The approach given in this work helps to organize the operative control over action intensity of pollution emissions in atmosphere. The approach allows to sequential estimate of unknown intensity of atmospheric pollution source on the base of concentration measurements of impurity in several stationary control points is offered in the work. The inverse problem was solved by means of the step-by-step regularization and the sequential function specification method. The solution is presented in the form of the digital filter in terms of Hamming. The fitting algorithm of regularization parameter r for function specification method is described.

The models of liquid heptane and cyclohexane has been developed. The properties of model liquids appear to be in a good agreement with a properties of real liquids. X-Ray diffraction spectra of model liquids were also in a good agreement with experimental ones. Radial distribution functions analysis allows us to reveal a crucial molecular feature of cyclohexane. Isometric molecules of cyclohexane are packed more tightly and regular. Tight packing lead to the free volume deficiency, which could explain increased viscosity and melting temperature of cyclohexane.

This article describes a method to model the course of forest ecosystem succession to the climax state by means of a Markov chain. In contrast to traditional methods of forest succession modelling based on changes of vegetation types, several variants of the vertical structure of communities formed by late-successional tree species are taken as the transition states of the model. Durations of succession courses from any stage are not set in absolute time units, but calculated as the average number of steps before reaching the climax in a unified time scale. The regularities of succession courses are revealed in the proper time of forest ecosystems shaping. The evidences are obtained that internal features of the spatial and population structure do stochastically determine the course and the pace of forest succession. The property of developing vegetation of forest communities is defined as an attribute of stochastic determinism in the course of autogenous succession.