All issues

Based on the modeling method using a mesh system, an algorithm is implemented for solving a unsteady problem with moving bodies The algorithm takes into account the movement and rotation of bodies according to a given law of motion. The algorithm is applied to analysis the flow around an infinite composed of cylinders with an elliptical cross-section, which either move across the flow or rotate with a change in the angle of attack. To simulate the flow of bodies with a sharp edge, characteristic of the profiles of gas turbine machines, an algorithm for constructing a mesh of type C with the inclusion of a certain area behind the profile is implemented. The program for modeling the flow near the profile is implemented within the framework of models of Euler equations, Navier – Stokes equations in the approximation of a thin layer with laminar viscosity and turbulent viscosity in the framework of an algebraic viscosity model. The program has also been adapted to solve the problems of internal gas dynamics of turbomachines. For this purpose, the method of setting the boundary conditions at the entrance and exit from the calculated area from the velocity to the pressure drop, as well as at the lateral boundaries from the free flow to the periodicity, was changed. This made it possible to simulate the flow of gas in the inter-blade channels of compressors and turbines of gas turbine engines. To refine the algorithm, a series of calculations of the aerodynamic parameters of several turbine cascades in various subsonic and supersonic modes and their comparison with the experiment were carried out. Calculations of turbine grating parameters were carried out within the framework of the inviscid and viscous gas model. The calculation and experiment were compared by the distribution of gas parameters near the profile, as well as by the energy losses of the flow in the cascade. Calculations have shown the applicability and correctness of the program to solve this class of problems. To test the program on the problems of external subsonic aerodynamics, calculations of the aerodynamic characteristics of an isolated airfoil in an undisturbed flow were performed. The results obtained allow us to assert the applicability of the hybrid grid method to various classes of problems of applied gas dynamics.

In this paper, the structure of a shock wave in a binary gas mixture is studied on the basis of direct solution of the Boltzmann kinetic equation. The conservative projection method is used to evaluate the collision integral in the kinetic equation. The applied evaluation formulas and numerical methods are described in detail. The model of hard spheres is used as an interaction potential of molecules. Numerical simulation is performed using the developed simulation environment software, which makes it possible to study both steady and non-steady flows of gas mixtures in various flow regimes and for an arbitrary geometry of the problem. Modeling is performed on a cluster architecture. Due to the use of code parallelization technologies, a significant acceleration of computations is achieved. With a fixed accuracy controlled by the simulation parameters, the distributions of macroscopic characteristics of the mixture components through the shock wave front were obtained. Computations were conducted for various ratios of molecular masses and Mach numbers. The total accuracy of at least 1% for the local values of molecular density and temperature and 3% for the shock front width was achieved. The obtained results were compared with existing computation data. The results presented in this paper are of theoretical significance, and can serve as a test computation, since they are obtained using the exact Boltzmann equation.

While working on activity recognition using wearable sensors for healthcare applications, the main issue arises in the classification of activities. When we attempt to classify activities like walking, sitting, or running from accelerometer and gyroscope data, the signals often overlap and noise complicates the classification process. The existing methods do not have solid mathematical foundations to handle this issue. We started with the standard magnitude approach where one can compute $m =  \sqrt{a^2_1 + a^2_2 + a^2_3}$ from the accelerometer readings, but this approach failed because different activities ended up in overlapping regions. We therefore developed a different approach. Instead of collapsing the 6-dimensional sensor data into simple magnitudes, we keep all six dimensions and treat each activity as a rectangular box in this 6D space. We define these boxes using simple interval constraints. For example, walking occurs when the $x$-axis accelerometer reading is between $2$ and $4$, the $y$-axis reading is between $9$ and $10$, and so on. The key breakthrough is what we call a separability index $s = \frac{d_{\min}^{}}{\sigma}$ that determines how accurately the classification will work. Here dmin represents how far apart the activity boxes are, and $\sigma$ represents the amount of noise present. From this simple idea, we derive a mathematical formula $P(\text{error}) \leqslant (n-1)\exp\left(-\frac{s^2}8\right)$  that predicts the error rate even before initiating the experiment. We tested this on the standard UCI-HAR and WISDM datasets and achieved $86.1 %$ accuracy. The theoretical predictions matched the actual results within $3 %$. This approach outperforms the traditional magnitude methods by $30.6 %$ and explains why certain activities overlap with each other.

The objective of this article is to develop a model for a realistic description of a mixed flow of two types of vehicles (cars and trucks) on multi-lane highways, taking into account differences not only in the technical characteristics of vehicles (dimensions, maximum speed), but also differences in driving strategies. The article includes a literature review, including publications of recent years, confirming the relevance of modeling heterogeneous traffic flows.

The new model takes into account that trucks have a lower maximum speed compared to cars and are slower to start. They are less maneuverable, so it is more difficult for them to change lanes. In addition, the movement of trucks can be regulated by some restrictive rules, for example, a ban on driving in left lanes.

The model is based on the cellular automata theory, which allows for a comprehensive description of the features of individual flow components. At each time step, the state of the automaton cells is updated in two stages — changing lanes and moving forward. The algorithms of both substeps for cars and trucks differ. Each vehicle is assigned a number of parameters: vehicle type, length, maximum speed, lane change strategy, in-lane movement strategy.

The model is implemented as a software package that allows simulating traffic on various sections of the road network — intersections, sections with narrowing and widening of the road, entrances and exits from the highway. In this work, a road section with a varying number of lanes and a straight multi-lane section with a virtual detector were selected for testing the model. The results are presented in the form of local speed-density and flow-density diagrams, as well as spatiotemporal speed diagrams.

To test the model, a number of problems with different percentages of passenger cars and trucks are solved, which allows demonstrating a drop in the capacity of elements of the road network with an increase in the share of trucks in the flow. The cases of uniform distribution by lanes and the restriction to the right lane for trucks are simulated. The positive effect of introducing a ban on the movement of trucks in left lanes on a multi-lane highway is illustrated.

This paper describes a method for generating a synthetic database of stenoses, consisting of 1620 entries. Each entry represents the results of a numerical experiment simulating the three-dimensional flow of a viscous incompressible fluid through a tube with a variable cross-section: pressure drop, mean flow rate, cross-sectionally averaged inlet blood flow velocity, maximum stenosis severity, stenosis length, stenosis asymmetry, tube radius, and Reynolds number. The database was validated by comparison with other models (with elastic walls) and bench experiments, showing a deviation in pressure drops of no more than 4%. The synthetic stenosis database was used to train a physics-informed neural network for the rapid estimation of pressure drop based on four key input parameters: Reynolds number, stenosis length, stenosis severity, and stenosis asymmetry coefficient. The physics-informed aspect was achieved by introducing penalties into the loss function for the absence of a positive pressure drop and for the lack of monotonicity of the pressure drop with respect to the input parameters. The physics-informed neural network demonstrated higher accuracy on hemodynamically significant stenoses when tested on a validation set and on new stenoses not represented in the database. The mean relative error for stenoses with a length of 8 healthy vessel radii was 6% for the physics-informed network and 13% for a classical neural network. The errors for short stenoses with a length of 4 radii were nearly identical: 9.5% for the physics-informed network and 10% for the classical neural network. The developed method for the functional assessment of the hemodynamic significance of stenoses can be used both as a standalone tool for clinical stenosis evaluation and as a component of network blood flow models. The approach becomes most relevant when modeling multi-vessel disease, which is predominant in clinical practice. The key advantage of the method lies in the physical correctness of the results and accuracy comparable to classical modeling, but with significantly lower computational costs.

The article submits wall functions model “FlowVision”. The model allows simulating turbulent flows of fluid and gas over solid impermeable surfaces on different grids. Four turbulence models are considered: $k-\varepsilon$ FlowVision, $k-\varepsilon$ Standard, SST $k-\omega$, SA. Details of implementation of turbulence models in FlowVision software are discussed. Calculations of two test cases are demonstrated.

Optimization of hull lines for the minimum resistance to movement is a problem of current interest in ship hydrodynamics. In practice, lines design is still to some extent an art. The usual approaches to decrease the ship resistance are based on the model experiment and/or CFD simulation, following the trial and error method. The paper presents a new method of in-detail hull form design based on the wave-based optimization approach. The method provides systematic variation of the hull geometrical form, which corresponds to alteration of longitudinal distribution of the hull volume, while its vertical volume distribution is fixed or highly controlled. It’s well known from the theoretical studies that the vertical distribution can't be optimized by condition of minimum wave resistance, thus it can be neglected for the optimization procedures. The method efficiency was investigated by application to the foreship of KCS, the well-known test object from the workshop Gothenburg-2000. The variations of the longitudinal distribution of the volume were set on the sectional area curve as finite volume increments and then transferred to the lines plan with the help of special frame transformation methods. The CFD towing simulations were carried out for the initial hull form and the six modified variants. According to the simulation results, examined modifications caused the resistance increments in the range 1.3–6.5 %. Optimization process was underpinned with the respective data analysis based on the new hypothesis, according to which, the resistance increments caused by separate longitudinal segments of hull form meet the principle of superposition. The achieved results, which are presented as the optimum distribution of volume present in the optimized designed hull form, which shows the interesting characteristics that its resistance has decrease by 8.9 % in respect to initial KCS hull form. Visualization of the wave patterns showed an attenuation of the transversal wave components, and the intensification of the diverging wave components.

Numerical study of unsteady mixed convection in an open partially porous horizontal channel with a heatgenerating source was performed. The outer surfaces of horizontal walls of finite thickness were adiabatic. In the channel there was a Newtonian heat-conducting fluid with a temperature-dependent viscosity. The discrete heatconducting and heat-generating source is located inside the bottom wall. The temperature of the fluid phase was equal to the temperature of the porous medium, and calculations were performed using the local thermal equilibrium model. The porous insertion is isotropic, homogeneous and permeable to fluid. The Darcy–Brinkman model was used to simulate the transport process within the porous medium. Governing equations formulated in dimensionless variables “stream function – vorticity – temperature” using the Boussinesq approximation were solved numerically by the finite difference method. The vorticity dispersion equation and energy equation were solved using locally one-dimensional Samarskii scheme. The diffusive terms were approximated by central differences, while the convective terms were approximated using monotonic Samarskii scheme. The difference equations were solved by the Thomas algorithm. The approximated Poisson equation for the stream function was solved separately by successive over-relaxation method. Optimal value of the relaxation parameter was found on the basis of computational experiments. The developed computational code was tested using a set of uniform grids and verified by comparing the results obtained of other authors.

Numerical analysis of unsteady mixed convection of variable viscosity fluid in the horizontal channel with a heat-generating source was performed for the following parameters: $\mathrm{Pr} = 7.0$, $\varepsilon = 0.8$, $\mathrm{Gr} = 10^5$, $C = 0-1$, $10^{-5} < \mathrm{Da} < 10^{-1}$, $50 < \mathrm{Re} < 500$, $\delta = l/H = 0.6-3$. Distributions of the isolines of the stream function, temperature and the dependences of the average Nusselt number and the average temperature inside the heater were obtained in a steady-state regime, when the stationary picture of the flow and heat transfer is observed. As a result we showed that an addition of a porous insertion leads to an intensification of heat removal from the surface of the energy source. The increase in the porous insertion sizes and the use of working fluid with different thermal characteristics, lead to a decrease in temperature inside the source.

Solution of Dynamic Light Scattering problem makes it possible to determine particle size distribution (PSD) from the spectrum of the intensity of scattered light. As a result of experiment, an intensity curve is obtained. The experimentally obtained spectrum of intensity is compared with the theoretically expected spectrum, which is the Lorentzian line. The main task is to determine on the basis of these data the relative concentrations of particles of each class presented in the solution. The article presents a method for constructing and using a neural network trained on synthetic data to determine PSD in a solution in the range of 1–500 nm. The neural network has a fully connected layer of 60 neurons with the RELU activation function at the output, a layer of 45 neurons and the same activation function, a dropout layer and 2 layers with 15 and 1 neurons (network output). The article describes how the network has been trained and tested on synthetic and experimental data. On the synthetic data, the standard deviation metric (rmse) gave a value of 1.3157 nm. Experimental data were obtained for particle sizes of 200 nm, 400 nm and a solution with representatives of both sizes. The results of the neural network and the classical linear methods are compared. The disadvantages of the classical methods are that it is difficult to determine the degree of regularization: too much regularization leads to the particle size distribution curves are much smoothed out, and weak regularization gives oscillating curves and low reliability of the results. The paper shows that the neural network gives a good prediction for particles with a large size. For small sizes, the prediction is worse, but the error quickly decreases as the particle size increases.

The purpose of this work is to develop a universal computer program (solver) which solves kinetic Boltzmann equation for simulations of rarefied gas flows in complexly shaped devices. The structure of the solver is described in details. Its efficiency is demonstrated on an example of calculations of a modern many tubes Knudsen pump. The kinetic Boltzmann equation is solved by finite-difference method on discrete grid in spatial and velocity spaces. The differential advection operator is approximated by finite difference method. The calculation of the collision integral is based on the conservative projection method.

In the developed computational program the unstructured spatial mesh is generated using GMSH and may include prisms, tetrahedrons, hexahedrons and pyramids. The mesh is denser in areas of flow with large gradients of gas parameters. A three-dimensional velocity grid consists of cubic cells of equal volume.

A huge amount of calculations requires effective parallelization of the algorithm which is implemented in the program with the use of Message Passing Interface (MPI) technology. An information transfer from one node to another is implemented as a kind of boundary condition. As a result, every MPI node contains the information about only its part of the grid.

The main result of the work is presented in the graph of pressure difference in 2 reservoirs connected by a multitube Knudsen pump from Knudsen number. This characteristic of the Knudsen pump obtained by numerical methods shows the quality of the pump. Distributions of pressure, temperature and gas concentration in a steady state inside the pump and the reservoirs are presented as well.

The correctness of the solver is checked using two special test solutions of more simple boundary problems — test with temperature distribution between 2 planes with different temperatures and test with conservation of total gas mass.

The correctness of the obtained data for multitube Knudsen pump is checked using denser spatial and velocity grids, using more collisions in collision integral per time step.