All issues

This study investigates the influence of a time-periodic (modulation) magnetic field upon the development of ferroconvection in a densely packed medium saturated with couple stress ferromagnetic fluid. The Darcy model is used to describe the flow in porous medium. The research is important from practical and theoretical point of view. A time-periodic magnetic field is essential in circumscribing channels where the effect of gravity is less or nonexistent to generate circulation. There are numerous engineering uses for this in the manufacturing of magnetic field sensors, charged particle electrode materials, modulators, magnetic resonators, and optical devices. The resulting physical eigenvalue problem is dealt with by using isothermal boundary conditions and the regular perturbation technique with a small time-periodic amplitude. The onset criteria were defined on the supposition that the exchange of stability principle holds. The shift in the thermal Rayleigh number is dependent on the associated parameters: magnetic parameter, Vadasz number, couple stress parameter, porosity, and frequency of the time-periodic function. The results in this case indicate that the onset of ferroconvection can be enhanced or reduced by appropriate changes in the governing parameters.

The influence of solar activity on various processes on Earth has long been the subject of close study, which resulted in the appearance of the term “space weather”. The most striking manifestation of solar activity are the so-called “solar flares”, which are explosive releases of energy in the solar atmosphere, resulting in a flow of photons and charged particles reaching the Earth with a slight delay. After two or three days, a plasma flow reaches the Earth. Thus, a solar flare is an event stretched out in time for several days. The impact of solar flares on human health and the technosphere is a popular subject for discussion and scientific research. This article provides a quantitative assessment of the trigger effect of solar flares on the release of energy as a result of seismic events. The article provides an estimate in the form of a “percentage” of the released seismic energy of the trigger effect of solar flares on the release of seismic energy worldwide and in 8 areas of the Pacific Fire Ring. The initial data are a time series of solar flares from July 31, 1996 to the end of 2024. The time points of the greatest local extremes of solar flare intensity and released seismic energy were studied in successive time intervals of 1 day. For each pair of time sequences in sliding time windows, the “lead measures” of each time sequence relative to the other were estimated using a parametric model of the intensity of interacting point processes. The difference between the “direct” lead measure of the time points of local extremes of solar flare intensity relative to the moments of maximum released seismic energy and the “reverse” lead measure was calculated. The average value of the difference in lead measures provides an estimate of the share of the intensity of seismic events for which solar flares are a trigger.

The paper presents a mathematical model to be used for design of cooling tanks for vapor desublimation. Results of calculations for the process of cooling of two tanks in a block of four are presented. Chart of the cooling air flow in the piping network is presented.

Modification of the lattice Boltzmann method for computation of viscous Newtonian fluid flows is considered. Modified method is based on the splitting of differential operator in Navier–Stokes equation and on the idea of instantaneous Maxwellisation of distribution function. The problems for the system of lattice kinetic equations and for the system of linear diffusion equations are solved while one time step is realized. The efficiency of the method proposed in comparison with the ordinary lattice Boltzmann method is demonstrated on the solution of the problem of planar flow in cavern in wide range of Reynolds number and various grid resolution.

A mathematical model for the numerical study of thermal destruction of the "Chelyabinsk" meteorite when entering the Earth’s atmosphere is presented in the article. The study was conducted in the framework of an integrated approach, including the calculation of the meteorite trajectory associated with the physical processes connected with the meteorite motion. Together with the trajectory the flow field and radiation-convective heat
transfer were determined as well as warming and destruction of the meteorite under the influence of the calculated heat load. An integrated approach allows to determine the trajectories of space objects more precisely, predict the area of their fall and destruction.

Consider the simulation workshop for production of polymer components composite materials. Describes a technique for the manufacture of parts and, based on the event model developed theoretical production. By event-developed theoretical models of production created a computer simulation model in software simulation Tecnomatix Plant Simulation. The analysis of the simulation model created. Given the bottlenecks found, a new simulation model that meets the requirements. The results obtained on the basis of which the practical recommendations to increase the number of parts produced.

The problem of application of miscroscopic traffic models for the analysis of large network segments is discussed with an example of discrete flow with safe distance. A concept of integral charasteristics of network segments is introduced, a method for obtaining such characteristics via microscopic traffic flow models is presented. Said method is applied to a circular unidirectional interchange, obtained characteristics analysed.

The goal of this work is to generalize second order mathematical models for automotive flow using algorithm for building state equation — the dependency of pressure on traffic density — which is adequate with regard to real world data. The form of state equation, which closes the system of model equations, is obtained from experimental form of fundamental diagram — the dependency of traffic flow intensity on its density, and completely defines all properties of any phenomenological model. The proposed approach was verified using numerical experiments on typical traffic data, obtained from PeMS system (http://pems.dot.ca.gov/), using segment of I-507 highway in California, USA as model system.

The results of verification carried out for investigations of hydrodynamic effect on reentry conicalsegmental space vehicle are presented in the paper. The program complex Flow Vision is used for this analysis. The purpose of the study is verification of using Flow Vision program complex for problem solving mentioned above on the base of comparison between calculated and experimental data, obtained on the Apollo landing models and new development reentry spacecraft of manned transporting spaceship designed by RSC Energia. The comparison was carried out through the data of pressure values on spacecraft model surfaces during its water landing and inertia center motion parameters.

The results of study show good agreement between experimental and calculated data of force effects on vehicle construction during water landing and its motion parameters in the water medium. Computer simulation sufficiently well reproduces influence of initial velocities & water entry angles variations on water landing process.

Using of computer simulation provides simultaneous acquisition of all data information needed for investigation of water landing peculiarities during construction design, notably, hydrodynamic effects for structural strength calculations, parameters and dynamics of center mass motion and vehicle revolution around center mass for estimation water landing conditions, as well as vehicle stability after landing.

Obtained results confirm suitability of using Flow Vision program complex for water landing vehicle investigations and investigations of influence of different landing regimes through wide initial condition change range, that permits considerably decrease extent of expensive experimental tests and realize landing conditions which are sufficiently complicated for realizing in model physical experiments.

In the last decades, the development of methods for increasing the efficiency of hydrocarbon extraction in fields with unconventional reserves containing large amounts of gas condensate is of great importance. This makes important the development of methods of mathematical modeling that realistically describe physical processes in a gas-condensate mixture in a porous medium.

In the paper, a mathematical model which describes the dynamics of the pressure, velocity and concentration of the components of a two-component two-phase mixture entering a laboratory model of plast filled with a porous substance with known physicochemical properties is considered. The mathematical model is based on a system of nonlinear spatially one-dimensional partial differential equations with the corresponding initial and boundary conditions. Laboratory experiments show that during a finite time the system stabilizes, what gives a basis to proceed to the stationary formulation of the problem.

The numerical solution of the formulated system of ordinary differential equations is realized in the Maple environment on the basis of the Runge–Kutta procedure. It is shown that the physical parameters of the gascondensate mixture, which characterize the modeled system in the stabilization regime, obtained on this basis, are in good agreement with the available experimental data. This confirms the correctness of the chosen approach and the validity of its further application and development for computer modeling of physical processes in gas-condensate mixtures in a porous medium. The paper presents a mathematical formulation of the system of partial differential equations and of respective system stationary equations, describes the numerical approach, and discusses the numerical results obtained in comparison with experimental data.