All issues

The paper considers an earlier proposed by the author discrete modification of the A. P. Mikhailov “power – society” model. The modification is based on a stochastic cellular automaton, it’s microdynamics being completely different from the c continuous model based on differential equations. However, the macrodynamics of the discrete modification is shown in previous works to be equivalent to one of the continuous model. This is important, but at the same time raises the question why use the discrete model. The answer lies in its flexibility, which allows adding a variety of factors, the consideration of which in a continuous model either leads to a significant increase in computational complexity or is simply impossible.

This paper considers several examples of such applicability expansion of the model, with the help of which a number of applied problems are solved.

One of the modifications of the model takes into account economic ties between regions and municipalities, which could not be studied in the basic model. Computational experiments confirmed the improvement of the socio-economic indicators of the system under the influence of the ties.

The second modification allows internal migration in the system. Using it we studied the socio-economic development of a more prosperous region that attracts migrants.

Next we studied the dynamics of the system while the number of regions and municipalities changes. The negative impact of this process on the socio-economic indicators of the system was shown and possible control was found to overcome this negative impact.

The results of this study, therefore, include both the solution of some applied problems and the demonstration of the broader applicability of the discrete model compared with the continuous one.

The paper considers the problems of mathematical description of deontological aspects influencing the behavior of decision makers. A methodology is proposed for correlating utilitarian (material) and deontological (value) aspects in their decision-making, taking into account their psychological characteristics. A mathematical model is proposed for the joint consideration of utilitarian and deontological factors in decision-making in various situations. Some patterns related to this consideration are identified, and their formal description is given. The model shows that there is a tendency for a gradual decrease in the level of deontology in evaluating alternatives when making decisions (compared to what the outside world inclines to) towards greater utilitarianism. Over time, this trend begins to influence public opinion and society’s attitude to moral norms, gradually reducing the overall level of morality in society. This process can be stopped only by constantly and purposefully maintaining a high level of deontology by society and the state (ideological work, promotion of traditional values, educational work at school, etc.), otherwise society will inevitably become utilitarian over time, focusing exclusively on material factors when making decisions.

In the future, it is planned to use the developed tools for analyzing specific situations, including for analyzing the patterns of civilizational cycles: the rise and fall of the Roman Empire, the USSR, and modern Western civilization).

In single-photon emission computed tomography (SPECT), patients with bone disorders receive a radiopharmaceutical (RP) that accumulates selectively in pathological lesions. Accurate quantification of RP uptake plays a critical role in disease staging, prognosis, and the development of personalized treatment strategies. Traditionally, the accuracy of quantitative assessment is evaluated through in vitro clinical trials using the standardized physical NEMA IEC phantom, which contains six spheres simulating lesions of various sizes. However, such experiments are limited by high costs and radiation exposure to researchers. This study proposes an alternative in silico approach based on numerical simulation using a digital twin of the NEMA IEC phantom. The computational framework allows for extensive testing under varying conditions without physical constraints. Analogous to clinical protocols, we calculated the recovery coefficient (RC_max), defined as the ratio of the maximum activity in a lesion to its known true value. The simulation settings were tailored to clinical SPECT/CT protocols involving ^99mTc for patients with bone-related diseases. For the first time, we systematically analyzed the impact of lesion-to-background ratios and post-reconstruction filtering on RC_max values. Numerical experiments revealed the presence of edge artifacts in reconstructed lesion images, consistent with those observed in both real NEMA IEC phantom studies and patient scans. These artifacts introduce instability into the iterative reconstruction process and lead to errors in activity quantification. Our results demonstrate that post-filtering helps suppress edge artifacts and stabilizes the solution. However, it also significantly underestimates activity in small lesions. To address this issue, we introduce post-reconstruction correction factors derived from our simulations to improve the accuracy of quantification in lesions smaller than 20 mm in diameter.

Physical-mathematical model of drying of coal particles in the gas stream and the results of calculating the drying of the particles of brown coal in a drying tube are presented. It is shown that for the drying of coal can be used superheated water vapor. Thermodynamic model of drying of a particle in a drying tube are proposed. It allows to conduct a preliminary assessment of parameters of drying process.

Article is devoted to the creation of a mathematical control of the bank investment process. The whole process of building optimal control may be divided into two components: in the first place, there is the identification of the functions describing the liquid capital movement in the bank and, in the second place, the use of these functions in the scheme of dynamic programming. Before this problem was discussed in the article "Optimal control of the bank investment as a factor of economic stability" in the 4^th issue for 2012. In the present article considers this modification of the solution, in particular, we use ℜ(φ) as a function of reinvestment, where φ is inflow of liquid capital realized at the previous step of control.

The article contains results of modeling of bi-modal microstructure evolution of VT6 alloy during isothermal forging. The model of recrystallization based on dislocation approach to nucleation and growth of nuclear was made to calculate recrystallization processes of the secondary alpha phase. The globularization process of lamellar alpha phase was calculated with assumption of diffusion-control migration of beta-phase boundary due to grain boundary diffusion of vanadium atom. The theoretical results were compared with experimental one.

In the paper the model for a one-dimensional non-equilibrium riverbed process is proposed. The model takes into account the suspended and bed-load sediment transport. The bed-load transport is determined by using the original formula. This formula was derived from the thin bottom layer motion equation. The formula doesn’t contain new phenomenological parameters and takes into account the influence of bed slope, granulometric and physical mechanical parameters on the bed-load transport. A number of the model test problems are solved for the verification of the proposed mathematical model. The comparison of the calculation results with the established experimental data and the results of other authors is made. It was shown, that the obtained results have a good agreement with the experimental data in spite of the relative simplicity of the proposed mathematical model.

The BES-III experiment at the IHEP CAS, Beijing, is running at the high-luminosity e+e- collider BEPC-II to study physics of charm quarks and tau leptons. The world largest samples of J/psi and psi' events are already collected, a number of unique data samples in the energy range 2.5–4.6 GeV have been taken. The data volume is expected to increase by an order of magnitude in the coming years. This requires to move from a centralized computing system to a distributed computing environment, thus allowing the use of computing resources from remote sites — members of the BES-III Collaboration. In this report the general information, latest results and development plans of the BES-III distributed computing system are presented.

This work is devoted to creation of static atomic model of two surfaces in contact at electric diamond grinding: single-points diamond and material grinded of them. At the heart of the work there are issues of computer visualization of these surfaces at the molecular level, since traditional mathematical description does not possess sufficient visualization to demonstrate some aspects of the atomic tribology of metal cutting to simultaneously occurring the different, by their physical nature, processes. And in the electric diamond grinding blends effect of several processes simultaneously: mechanical, electrical and electrochemical. So the modeling technique proposed by authors is still the only way to see what is happening at the atomic level, cutting material of single-point diamond.

Technical diagnosis’ current trends are connected to application of FEM computer simulation, which allows, to some extent, replace real experiments, reduce costs for investigation and minimize risks. Computer simulation, just at the stage of research and development, allows carrying out of diagnostics of equipment to detect permissible fluctuations of parameters of equipment’s work. Peculiarity of diagnosis of rolling equipment is that functioning of rolling equipment is directly tied with manufacturing of product with required quality, including accuracy. At that design of techniques of technical diagnosis and diagnostical modelling is very important. Computer simulation of cold rolling of strip was carried out. At that upper working roll was doing vibrations in horizontal direction according with published data of experiments on continuous 1700 rolling mill. Vibration of working roll in a stand appeared due to gap between roll’s craft and guide in a stand and led to periodical fluctuations of strip’s thickness. After computer simulation with the help of DEFORM software strip with longitudinal and transversal thickness variation was gotten. Visualization of strip’s geometrical parameters, according with simulation data, corresponded to type of inhomogeneity of surface of strip rolled in real. Further analysis of thickness variation was done in order to identify, on the basis of simulation, sources of periodical components of strip’s thickness, whose reasons are malfunctions of equipment. Advantage of computer simulation while searching the sources of forming of thickness variation is that different hypothesis concerning thickness formations may be tested without conducting real experiments and costs of different types may be reduced. Moreover, while simulation, initial strip’s thickness will not have fluctuations as opposed to industrial or laboratorial experiments. On the basis of spectral analysis of random process, it was established that frequency of changing of strip’s thickness after rolling in one stand coincides with frequency of working roll’s vibration. Results of computer simulation correlate with results of the researches for 1700 mill. Therefore, opportunity to apply computer simulation to find reasons of formation of thickness variation of strip on the industrial rolling mill is shown.