All issues

Storage is the essential and expensive part of cloud computation both from the point of view of network requirements and data access organization. So the choice of storage architecture can be crucial for any application. In this article we can look at the types of cloud architectures for data processing and data storage based on the proven technology of enterprise storage. The advantage of cloud computing is the ability to virtualize and share resources among different applications for better server utilization. We are discussing and evaluating distributed data processing, database architectures for cloud computing and database query in the local network and for real time conditions.

A kinetic model of radiation-induced DNA double-strand break repair with an ultraslow component of complex damage is proposed. The model was parameterized using experimental time courses of $\gamma$H2AX and pATM foci in human mesenchymal stem cells after exposure to $\gamma$-rays (⁶⁰Co) and 14.1 MeV neutrons at a dose of 0.5 Gy. The standard two-component scheme reproduced the early response phase (0.5–6 h) but systematically underestimated the residual marker signal at 24 h, especially after neutron irradiation. Introducing an ultraslow component allowed both the early and late phases of the response to be described without fitting separate kinetic parameters for different radiation types. The differences between γ-irradiation and neutrons were introduced only through the distribution of damage between fractions, including fixed ultraslow fractions $\pi g = 0.15$ and $\pi n = 0.40$. Model comparison using $\chi^2$ and AIC, together with bootstrap analysis and local sensitivity assessment, supports the robustness of the conclusion that an ultraslow damage fraction is required to describe late post-radiation signaling.

The paper estimates the recurrence rate of stock indicies S&P100, CAC40, DAX, FTSE, AMEX, ATX, NASDAQ, BEL20. The introduced qunatitative measure of the recurrence rate underlies type I and type II errors. We show that more than three quarters of the indicies’ falls occur on average during the first quarter of the time between them. This result expands from sufficiently large falls, which are observed on average two times a year, over smaller falls, which occur approximately once 1.5–2 months.

Modern power transportation systems are the complex engineering systems. Such systems include both point facilities (power producers, consumers, transformer substations, etc.) and the distributed elements (f.e. power lines). Such structures are presented in the form of the graphs with different types of nodes under creating the mathematical models. It is necessary to solve the system of partial differential equations of the hyperbolic type to study the dynamic effects in such systems.

An approach similar to one already applied in modeling similar problems earlier used in the work. New variant of the splitting method was used proposed by the authors. Unlike most known works, the splitting is not carried out according to physical processes (energy transport without dissipation, separately dissipative processes). We used splitting to the transport equations with the drain and the exchange between Reimann’s invariants. This splitting makes possible to construct the hybrid schemes for Riemann invariants with a high order of approximation and minimal dissipation error. An example of constructing such a hybrid differential scheme is described for a single-phase power line. The difference scheme proposed is based on the analysis of the properties of the schemes in the space of insufficient coefficients.

Examples of the model problem numerical solutions using the proposed splitting and the difference scheme are given. The results of the numerical calculations shows that the difference scheme allows to reproduce the arising regions of large gradients. It is shown that the difference schemes also allow detecting resonances in such the systems.

Epidemic models are widely used to mimic social activity, such as spreading of rumors or panic. Simultaneously, models of excitable media are traditionally used to simulate the propagation of activity. Spreading of activity in the virtual community was simulated within two models: the SIRS epidemic model and the Wiener – Rosenblut model of the excitable media. We used network versions of these models. The network was assumed to be heterogeneous, namely, each element of the network has an individual set of characteristics, which corresponds to different psychological types of community members. The structure of a virtual network relies on an appropriate scale-free network. Modeling was carried out on scale-free networks with various values of the average degree of vertices. Additionally, a special case was considered, namely, a complete graph corresponding to a close professional group, when each member of the group interacts with each. Participants in a virtual community can be in one of three states: 1) potential readiness to accept certain information; 2) active interest to this information; 3) complete indifference to this information. These states correspond to the conditions that are usually used in epidemic models: 1) susceptible to infection, 2) infected, 3) refractory (immune or death due to disease). A comparison of the two models showed their similarity both at the level of main assumptions and at the level of possible modes. Distribution of activity over the network is similar to the spread of infectious diseases. It is shown that activity in virtual networks may experience fluctuations or decay.

The method for mapping of intermediate representations (IR) set of C, C++ programs to vector embedding space is considered to create an empirical estimation framework for static performance prediction using LLVM compiler infrastructure. The usage of embeddings makes programs easier to compare due to avoiding Control Flow Graphs (CFG) and Data Flow Graphs (DFG) direct comparison. This method is based on transformation series of the initial IR such as: instrumentation — injection of artificial instructions in an instrumentation compiler’s pass depending on load offset delta in the current instruction compared to the previous one, mapping of instrumented IR into multidimensional vector with IR2Vec and dimension reduction with t-SNE (t-distributed stochastic neighbor embedding) method. The D1 cache miss ratio measured with perf stat tool is considered as performance metric. A heuristic criterion of programs having more or less cache miss ratio is given. This criterion is based on embeddings of programs in 2D-space. The instrumentation compiler’s pass developed in this work is described: how it generates and injects artificial instructions into IR within the used memory model. The software pipeline that implements the performance estimation based on LLVM compiler infrastructure is given. Computational experiments are performed on synthetic tests which are the sets of programs with the same CFGs but with different sequences of offsets used when accessing the one-dimensional array of a given size. The correlation coefficient between performance metric and distance to the worst program’s embedding is measured and proved to be negative regardless of t-SNE initialization. This fact proves the heuristic criterion to be true. The process of such synthetic tests generation is also considered. Moreover, the variety of performance metric in programs set in such a test is proposed as a metric to be improved with exploration of more tests generators.

This study presents a methodology for assessing the functioning of complex systems, taking into account the type of distribution of indicators characterizing the functioning of structural elements of such a system operating under conditions of uncertainty. Unlike previous studies, the work integrates the identification of the type of indicator distribution with their Bayesian assessment, taking into account the norms characterizing the required results of the functioning of the structural elements of the system. The type of distribution and its characteristics provide more complete information about the properties of an object and their consideration affects the results of evaluating the functioning of elements of complex systems, especially in cases of the presence of “heavy” tails characteristic of a number of socio-economic processes and systems. It is shown that it is advisable to identify the type of distribution based on modified data due to the exclusion of the best trend in statistical characteristics. The determination of the best type of distribution is carried out according to the Kolmogorov – Smirnov agreement criterion, which showed the best (according to the available sample) statistical estimates compared to other criteria or a mixture of them. The obtained type of distribution is used in the probabilistic assessment of the results of the functioning of subsystem elements based on Bayesian intelligent technologies that successfully operate in conditions of uncertainty, and which make it possible to present such results on numerical and linguistic scales in a general hierarchical information model. The methodology was tested using the example of the object subsystem (G.B.Kleiner’s spatio-temporal classification) of the economic subsystem of the Tula region, considered as a complex system — a socio-ecological-economic system. The volume of gross domestic product by region in six sections of the all-Russian classifier of economic activities (sections A, B, C, D, E) was used as assessment indicators. In some cases, it is possible to reduce the level of uncertainty in the estimates of indicators.; to obtain estimates that are more stringent than the norm, which ultimately leads to the conclusion that the use of the distribution type in the formation of probabilistic estimates of indicators of structural elements of complex systems makes it possible to justify their correct application within the framework of the concept of evidence-based modeling.

The article considers the problem of forecasting the number of employed and unemployed persons in a multisectoral labor market using a balance mathematical model of labor force intersectoral dynamics.

The balance mathematical model makes it possible to calculate the values of intersectoral dynamics indicators using only statistical data on sectoral employment and unemployment provided by the Federal State Statistics Service. Intersectoral dynamics indicators of labor force calculated for several years in a row are used to build trends for each of these indicators. The found trends are used to calculation of forecasted intersectoral dynamics indicators of labor force. The sectoral employment and unemployment of researched multisectoral labor market is forecasted based on values these forecasted indicators.

The proposed approach was applied to forecast the employed persons in the economic sectors of the Russian Federation in 2011–2016. The following types of trends were used to describe changes of intersectoral dynamics indicators values: linear, non-linear, constant. The procedure for selecting trends is clearly demonstrated by the example of indicators that determine the labor force movements from the “Transport and communications” sector to the “Healthcare and social services” sector, as well as from the “Public administration and military security, social security” sector to the “Education” sector.

Several approaches to forecasting was compared: a) naive forecast, within which the labor market indicators was forecasted only using a constant trend; b) forecasting based on a balance model using only a constant trend for all intersectoral dynamics indicators of labor force; c) forecasting directly by the number employed persons in economic sectors using the types of trends considered in the article; d) forecasting based on a balance model with the trends choice for each intersectoral dynamics indicators of labor force.

The article shows that the use of a balance model provides a better forecast quality compared to forecasting directly by the number of employed persons. The use of trends in intersectoral dynamics indicators improves the quality of the forecast. The article also provides analysis examples of the multisectoral labor market in the Russian Federation. Using the balance model, the following information was obtained: the labor force flows distribution outgoing from concrete sectors by sectors of the economy; the sectoral structure of the labor force flows ingoing in concrete sectors. This information is not directly contained in the data provided by the Federal State Statistics Service.

The paper present a dynamic macro model of world dynamics. The world is divided into 19 geographic regions in the model. The internal development of the regions is described by regression equations for demographic and economic indicators (Population, Gross Domestic Product, Gross Capital Formation). The bilateral trade flows from region to region describes interregional interactions and represented the trade submodel. Time, the gross product of the exporter and the gross product of the importer were used as regressors. Four types were considered: time pair regression — dependence of trade flow on time, export function — dependence of the share of trade flow in the gross product of the exporter on the gross product of the importer, import function — dependence of the share of trade flow in the gross product of the importer on the gross product of the exporter, multiple regression — dependence of trade flow on the gross products of the exporter and importer. Two types of functional dependence were used for each type: linear and log-linear, in total eight variants of the trading equation were studied. The quality of regression models is compared by the coefficient of determination. By calculations the model satisfactorily approximates the dynamics of monotonically changing indicators. The dynamics of non-monotonic trade flows is analyzed, three types of functional dependence on time are proposed for their approximation. It is shown that the number of foreign trade series can be approximated by the space of seven main components with a 10% error. The forecast of regional development and global dynamics up to 2040 is constructed.

The traditional approach to studying inter-journal communication involves analyzing journal citation graphs. This paper proposes a method for analyzing journal networks using a new type of bibliometric graph — a journal intersection graph based on the binary operation of set intersection — employing techniques grounded in the friendship index and the disparity function. The approach is demonstrated using a relatively small example of a real journal network, with data sourced from the All-Russian portal Math-Net.Ru information system: 63 journals from 2008–2021 meeting specific criteria, containing almost 69 thousand articles authored by 54 thousand individuals. The mathematical model of this real-world network is represented as an intersection graph using the Jaccard coefficient, which exhibits specific properties: low dimensionality, high graph density, and an edge weight distribution that is not approximated by a power law function. The obtained results include the network structure of connections within the studied set of journals, accounting for their degree of interaction, and the identification of significant vertices using the friendship index. This captures the graph’s structural properties, offers an obvious substantive interpretation, and allows for ranking journals by this metric. Thus, the method implements a tool for distinguishing between vertices that are leaders in terms of the friendship index and “network integrators” (based on closeness/betweenness centrality). It also demonstrates a qualitative change in structural properties when reducing graph density while maintaining connectivity, achieved by applying the disparity function. The sequential application of the disparity function while lowering the significance threshold allows for the identification of the graph’s core, containing the most strongly connected vertices. This, in turn, enables the determination of a set of vertices (and corresponding journals) that are simultaneously part of the core and have the highest significance according to the friendship index. An analysis of the levels of this resulting journal set within the “Belyi Spisok” (“White List”) shows these journals have a high rating. The findings provide a deeper understanding of the relationship structure within scientific journal networks and define new approaches for their study.